ProductsHeaderMinimizedBlack0719Notag
DLC970only
ProductsHeader0719minimal
5
Yes
None
1
1000000
Search...
/products/

Product Catalog

Thumbnail
Filter
Clear All
Sort By:

Categories:

+
+
+

View All:

Lumen Output:

Product Family:

Certifications and features:

PGx - LED Parking Garage Canopy Light

The PGx is a highly efficient LED canopy light suitable for most parking garage and canopy applications. It is available in two sizes – small (PGS – 9.5″ x 9.5″) and medium (PGM – 11.8″ x 11.8″). An optional microwave sensor maximizes energy savings by providing multi-level control based on motion and/or daylight detection. The housing is constructed of die cast aluminum, and it comes in a bronze or white powdercoat finish. The lens is polycarbonate.

Buy Now Request a Quote
Applications: Suitable for most parking garage and canopy applications
Lumen Output: From 3,100 in the PGS up to 12,700 in the PGM
Max Lumens Per Watt: 131
Predicted L70 Lifetime: >150,000 hrs
Warranty: 5 year limited system warranty
Certifications: cULus listed for wet locations. IP65 rated

High performance LED technology
• 0-10V dimming drivers standard on all
models except PGS LW
• 2kV surge protection on PGS LW, 4kV surge
protection on all other models. 10kV surge
protection optional.
• Can be surface or pendant mounted for
added flexibility
• Multi-level control based on motion and/or
daylight detection allows for maximum
energy savings with optional microwave
sensor.
Construction:
• Die cast aluminum housing
• Polycarbonate lens
• Bronze or white powdercoat finish
Applications:
Suitable for most parking garage and canopy
applications.
Warranty:
• 5 year limited system warranty
• see www.LumenFocus.com for complete
warranty terms and conditions

MSD Microwave daylight motion sensor dimming bronze white

CLS - LED Low Profile Canopy Light

The CLS is suitable for indoor or outdoor use. It can be surface or pendant mounted. A junction box mounting plate comes standard. Removable threaded plugs on the side can accommodate rigid electrical conduit or motion/photo sensors. The MSD is an optional IP65-rated microwave dimming motion/daylight sensor. The die cast aluminum housing of the CLS is covered with a durable dark bronze powder coat finish. The drop lens is made of impact resistant polycarbonate. The CLS is available in two sizes – 10-inch square (CLS 10) and 14-inch square (CLS 14).

Applications: For use in surface or pendant mount applications. Suitable for indoor or outdoors use: canopy, security, stairwell, corridors
Lumen Output: 4,948 in the CLS 10 and 9,548 in the CLS 14
Max Lumens Per Watt: 120
Predicted L70 Lifetime: ≥ 60,000 hrs
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

CPG2 - LED Parking Garage Canopy Light

The CPG2 features multi-level control based on motion and/or daylight detection, which allows for maximum energy savings with an optional built-in microwave sensor. This luminaire includes an easy-hang bracket, which fits a standard 4″ electrical box, allowing for one-person installation. An optional quick mount pendant bracket is available. The CPG2 sports a low-profile aluminum housing, a UV-stabilized clear acrylic lens, and is available in a bronze or white powder coat finish.

Applications: Suitable for most parking garage applications
Lumen Output: 3,630-6,444 lm
Max Lumens Per Watt: 120
Predicted L70 Lifetime: >100,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations (damp locations when used with quick mount bracket). IP66 certified.

CLP - LED Low Profile Canopy Light

The CLP canopy light is available with a quick mount bracket (QMB) for easy installation. The QMB also allows for pendant mounting. It features 1/2″ coin plugs with O-rings for conduit and photocell located on two sides and the back. The die cast aluminum housing features a textured powder coat finish over a chromate conversion coating. Suitable for most exterior canopy applications – industrial, retail, commercial.
Over 100 lumens per watt.
Available quick mount bracket (QMB) for easy installation. QMB also allows for pendant mounting.
1/2″ coin plugs with O-rings for conduit and photocell located on two sides and back.
Die cast aluminum housing. Textured powder coat finish over a chromate conversion coating.
Predicted L70 lifetime: greater than 60,000 hours at 25-degrees Celsium ambient.
CSA listed for wet locations (damp locations when used with quick mounting bracket).
5 year limited system warranty.

CLP-PAD. PPC120. PPC277. SPC120. SPC277. BPC120. BPC277. Replacement PAD lens for CSM. 1/2″ inch CdS pencil photocell 110V-130V. 208V-277V. 110V-130V. 208V-277V. Button photocell.
MD. Medium. PAD shielding. Prismatic acrylic drop lens. 840. 850. SP. Surge protection. BZ. Bronze. Custom colors.
CLPMD. CLP MD.

CPE - LED Canopy Light

The CPE is a highly efficient LED canopy luminaire that is suitable for indoor or outdoor use. The housing is constructed of die cast aluminum. The prismatic lens is impact resistant, UV-stabilized polycarbonate. The CPE has a fade-, weather-, and abrasion-resistant textured polyester powdercoat finish. It comes in two sizes – the 9-inch square (CPE 9) is a 24W unit. The 12-inch square (CPE 12) is a 54W luminaire. See spec sheet for exact dimensions.

Applications: For use in canopy applications, suitable for indoor or outdoor use: loading docks, entryways, stairwells, corridors
Sizes: 9-inch square (CPE 9) and 12-inch square (CPE 12)
Lumen Output: 2,219 in the CPE 9, 5,298 in the CPE 12
Max Lumens Per Watt: 98.8 in the CPE 12
Predicted L70 Lifetime: >50,000 hrs
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

Mounting

The CPE fits to any standard junction box, or mounts directly to any surface, via a detachable mounting plate. An included hook allows for hands-free installation while making electrical connections.

GSL - LED Gas Station Canopy Light

The GSL is a highly efficient canopy luminaire designed for typical canopy steel pan structures. It is suitable for most gas station canopy applications. The GSL features high performance LED technology, with efficacies over 140 lumens per watt. The housing of the GSL is made of die cast aluminum, and features a textured powder coat finish over a chromate conversion coating. The flat glass lens is tempered glass. The housing is designed to emulate legacy HID canopy lights that mount through a 4″ minimum diameter cut hole in the canopy. A galvanized steel back plate is provided to allow for installation over larger holes.

Buy Now Request a Quote
Applications: Suitable for most gas station canopy applications
Lumen Output: 17,904-29,677 lm
Max Lumens Per Watt: 144
Predicted L70 Lifetime: >100,000 hours @ 25 degrees Celsius ambient (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations (damp locations when used with quick mount bracket). IP66 rated.

CSM / CSL - LED Canopy Light

This luminaire is offered in two sizes – medium (CSM) and large (CSL). The die cast aluminum housing features a textured powder coat finish over a chromate conversion coating. It features 1/2″ coin plugs with O-rings for conduit and photocell located on two sides and the back. The CSL is available with a quick mount bracket (QMB) for easy installation. The QMB also allows for pendant mounting.

Buy Now Request a Quote
Applications: Suitable for most exterior canopy applications – industrial, retail, commercial
Lumen Output: From 3,200 lm – 6,200 lm
Max Lumens Per Watt: 127.5
Predicted L70 Lifetime: >100,000 hours at 25-degree Celsius ambient (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations (damp locations when used with quick mount bracket).

AMx - LED Multi-Purpose Area Light

The AMx is a versatile, multi-purpose LED area light available in two sizes – medium (AMM) and large (AML). There are multiple mounting options available, as well as multiple roadway and floodlight optics, making the AMx suitable for many applications. The housing is made of die cast aluminum, with a durable dark bronze powder coat finish. The lens is heat-resistant polycarbonate. It features 6kV surge protection. The AMx is IP66-rated, and rated for 3G vibration. Full or half shields are available, as is a wireguard. Highly efficient LEDs provide a drastic energy savings and longevity upgrade over more traditional outdoor lighting. The AMx boasts a predicted L70 lifetime of over 300,000 calculated hours.

Applications: Suitable for most exterior street or area light applications: street lighting, parking lots, exterior sport courts, sign lighting, building facades
Lumen Output: From 10,000 lm in the AMM up to nearly 36,000 in the AML
Max Lumens Per Watt: 134
Predicted L70 Lifetime: >300,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP66 rated. Rated for 3G vibration

AFL - LED Flood Light

The AFL features high performance, highly efficient LED technology. It is suitable for many exterior site lighting applications. A photocell comes standard, as do 0-10V dimming drivers. There are two mounts to choose from: the Extension Arm for direct mounting to poles or walls, and the Slipfitter Knuckle for round tenons. AFL’s housing is made of precision die cast aluminum. It is coated with a chip and fade resistant textured polyester powdercoat finish. The lens is UV-stabilized polycarbonate.

Buy Now Request a Quote
Applications: Suitable for exterior site lighting applications: parking lots, loading docks, roadways, sign lighting
Lumen Output: From about 12,000 to 18,300
Max Lumens Per Watt: 125
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP66 rated

FLx - LED Flood / Spot Light

The FLx is offered in a variety of lumen packages and sizes. There are multiple mounting configurations for maximum versatility. The housing is made of precision die cast aluminum with an integral heat sink, with a chip and fade resistant powder coat finish. The glass lens is constructed out tempered glass. This luminaire comes in four sizes – small (FLS), medium (FLM), large (FLL) and extra large (FLX).

Applications: Suitable for most exterior floodlight applications
Lumen Output: From around 2,300 lm up to just over 12,000 lm
Max Lumens Per Watt: 120
Predicted L70 Lifetime: 88,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: UL 1598 listed for wet locations. IP66 rated.

FLS1. FLM. FLM2. FLL2. FLX3.

Small flood. Medium flood. Large flood. Extra large flood. COB. Chip on board. Chip-on-board. MD. HI. Medium. High. F. S. Flood. Spot. 740. 750. SK. TR. WK. TK. Slipfitter knuckle. Trunnion mount. Wall mount knuckle. Wall-mount. Threaded knuckle. PC. Photocell. WG. Wireguard. VSR. Visor. BZ. Bronze. Custom color.

FSS / FSM - LED Flood Light

Available in small (FSS) and medium (FSM) sizes, this luminaire works as both a flood light and a wall sconce. It features multiple mounting methods and four lumen outputs, adding to its versatility and making it suitable for many applications. The housing is made of die cast aluminum. It has a textured powder coat finish over a chromate conversion coating.

Applications: Suitable for most exterior wall mount and flood applications – industrial, retail, commercial
Lumen Output: From 2,300 lm to 8,200 lm
Max Lumens Per Watt: 123
Predicted L70 Lifetime: >76,000 hours at 25-degrees Celsius ambient (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations. IP65-rated

Flood. Small. Medium. Optic. F. PPC120. PPC277. SPC120. SPC277. BPC120. BPC277. 1/2″ inch CdS pencil photocell. 110V-130V. 208V-277V. Button photocell.
CFG. Clear flat glass. 840. Wall mount. AKT. AKS. AUB. Adjustable knuckle. Slipfitter. U-bracket. U bracket. 1/2″ inch NSP threads. Surge protection. Bronze. Custom color.
FSSMD. FSS MD. FS S MD. FSSHI. FSS HI. FS S HI.
FSMMD. FSM MD. FS M MD. FSMHI. FSM HI. FS M HI.

PFx - LED Power Flood Light

The PFx is offered in a variety of sizes and lumen packages. Lumen output ranges from 2,030 in the smallest option (PF1), up to nearly 33,000 lumens in the largest option (PF5). A chip and fade resistant power coat finish adorns the die cast aluminum construction. Custom colors are available upon request. A photocell is optional.

Applications: Suitable for most exterior floodlight applications
Lumen Output: From 2,000 lumens up to just under 33,000 lumens
Max Lumens Per Watt: 110.2
Predicted L70 Lifetime: 52,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP66 rated.

PFxE - LED Economy Flood Light

The PFxE is an efficient LED flood light suitable for exterior use. It comes in two sizes. The PF1E is a 20-watt luminaire producing 2,148 lumens. the PF2E is a 50-watt unit producing 5,006 lumens. The PFxE features wide beam flood distribution, providing even illumination over the target area.

Applications: Suitable for most exterior floodlight applications
Lumen Output: 2,148 lumens in the PF1E, 5,006 in the PF2E
Max Lumens Per Watt: 108.5 (PF1E)
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP66-rated

FWS - LED Flood / Wall Sconce

The highly efficient FWS is functional as an LED wall sconce or flood light. It comes with two mounts for added flexibility – a knuckle mount for ground, wall or eave mounting, and a detachable wall mounting plate that allows for simple installation when making electrical connections. The attractive, modern styling of the FWS makes it a welcome addition to many commercial or residential exterior applications. There are three lumen output packages to choose from. Photocells are optional for the HI (“high”) lumen output package.

Applications: Suitable for commercial or residential exterior ground, wall or eave mount applications: entryways, perimeter/security, landscape lighting
Lumen Output: From 1,510 lm to 5,470 lm
Max Lumens Per Watt: 111.9
Predicted L70 Lifetime: >50,000 hrs
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65-rated

FTS - LED Twin Head Flood Light

The FTS is a high performance LED flood light with attractive architectural styling. Its frosted lens help provide comfortable, glare-free illumination. For mounting, the FTS features a detachable mounting plate with a hanging wire, allowing for hands-free installation when making electrical connections. It is available in bronze or white finish.

Applications: Suitable for commercial or residential exterior wall or eave mount applications: entryways, perimeter/security lighting
Lumen Output: 1,191 lumens
Max Lumens Per Watt: 98.7
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65-rated

twin double dual exterior outside luminaire

FAM / FAL - LED Power Flood Light

This luminaire is available in two sizes – large (FAL) and medium (FAM). The FAM can produce over 20,000 lumens, and the FAL can produce over 44,000 lumens. It can be used as a flood light or an area light. The FAM/FAL features an easy access driver compartment. The housing is constructed of die cast aluminum with an integral heat sink, and a chip and fade powder coat finish. The lens is made of UV stabilized polycarbonate. The FAM/FAL can be equipped with a slipfitter knuckle or a trunnion mount.

Applications: Suitable for most exterior flood or area light applications – parking lots, exterior sport courts
Lumen Output: 20,769 in the FAM, 44,740 in the FAL
Max Lumens Per Watt: 108.3 for the FAM, 115.8 for the FAL
Predicted L70 Lifetime: 66,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations

Flood. Medium. Large. HI. Low. High. Optic. F. Forward. 840. 850. SK. TR. Slipfitter knuckle. Trunnion mount. Photocell. BZ. Bronze. Custom color. Colors.

AMx - LED Multi-Purpose Area Light

The AMx is a versatile, multi-purpose LED area light available in two sizes – medium (AMM) and large (AML). There are multiple mounting options available, as well as multiple roadway and floodlight optics, making the AMx suitable for many applications. The housing is made of die cast aluminum, with a durable dark bronze powder coat finish. The lens is heat-resistant polycarbonate. It features 6kV surge protection. The AMx is IP66-rated, and rated for 3G vibration. Full or half shields are available, as is a wireguard. Highly efficient LEDs provide a drastic energy savings and longevity upgrade over more traditional outdoor lighting. The AMx boasts a predicted L70 lifetime of over 300,000 calculated hours.

Applications: Suitable for most exterior street or area light applications: street lighting, parking lots, exterior sport courts, sign lighting, building facades
Lumen Output: From 10,000 lm in the AMM up to nearly 36,000 in the AML
Max Lumens Per Watt: 134
Predicted L70 Lifetime: >300,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP66 rated. Rated for 3G vibration

AFL - LED Area Light

The AFL features high performance, highly efficient LED technology. It is suitable for many exterior site lighting applications. A photocell comes standard, as do 0-10V dimming drivers. There are two mounts to choose from: the Extension Arm for direct mounting to poles or walls, and the Slipfitter Knuckle for round tenons. AFL’s housing is made of precision die cast aluminum. It is coated with a chip and fade resistant textured polyester powdercoat finish. The lens is UV-stabilized polycarbonate.

Buy Now Request a Quote
Applications: Suitable for exterior site lighting applications: parking lots, loading docks, roadways, sign lighting
Lumen Output: From about 12,000 to 18,300
Max Lumens Per Watt: 125
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP66 rated

APM / APL - LED Street / Area Light

This area light is available in two size – large (APL) and medium (APM). It features multiple mounting options for maximum versatility. The APM/APL has an industrial grade 3 or 5 pin photocell receptacle. The housing features die cast aluminum construction. The APM/APL has an integral heat sink. It has a chip and fade resistant powder coat finish. The lens is UV-stabilized polycarbonate. Type II, III, IV or V optics are available. Suitable for most exterior street or area light applications, including parking lots and exterior sports courts.

From 6,000 to 28,000 lm output.

Up to 125 lumens per watt.

High performance LED technology with 0-10V dimming drivers optional.

Multiple mounting configurations for maximum versatility.

Die cast aluminum housing with integral heat sink.

UV stabilized polycarbonate lens with chip & fade resistant powder coat finish.

UL listed for wet locations. IP65 certified.

5 year limited system warranty.

APM. APL. Area light. Medium. Large. LW. MD. HI. High. Optic. Optics. 2. 3. 4. 5. Type II. III. IV. V. Mounting. SK. TR. WK. PM. EA. 740. 750. Slipfitter knuckle. Trunnion mount. Wall mount knuckle. Pole mount bracket. Extension arm. Photocell. PC. MS. Motion sensor. BZ. Bronze. Custom color. Colors.
APMLW. APM LW. AP M LW.
APMMD. APM MD. AP M MD.
APMHI. APM HI. AP M HI.

APLLW. APL LW. AP L LW.
APLMD. APL MD. AP L MD.
APLHI. APL HI. AP L HI.

ALx - LED Area Light

The ALx area light is a versatile luminaire available in four sizes – small (ALS), medium (ALM), large (ALL), and extra large (ALX). A wide variety of mounting options and optics are available, depending on the size selected (view individual spec sheets for more details). Each ALx is suitable most exterior street/area light applications, including parking lots or sports courts. The lenses are clear flat glass. The housings are die cast aluminum, with a textured powdercoat finish over a chromate conversion coating. Each ALx features long-life, high performance LED technology. 0-10V dimming drivers come standard.

Applications: Suitable for most exterior street or area light applications – street lighting, parking lots, exterior sport courts
Lumen Output: ALS: ~2,600-4,500; ALM: ~9,400-14,600; ALL: ~19,400-31,900; ALX: ~38,800-44,000 in the MD package, and ~52,000-66,800 in the HI package
Max Lumens Per Watt: Just under 127 (in the ALM)
Predicted L70 Lifetime: >100,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations. IP66 rated.

There are many mounting options for the ALx (ALS model pictured) – the Tenon Slipfitter (TS – available for ALS, ALM and ALL), the Adjustable U-Bracket (UB – available for ALS, ALM and ALL), the Yoke Mount (YK – available for ALS, ALM and ALL), the Easy Hang Wall Mount (WM – availalble for ALS, ALM and ALL), the Arm Mount (AM/AMR – available for ALS, ALM and ALL), the Adjustable Knuckle Slipfitter (AK – available for ALS, ALM, ALL and ALX), and the Adjustable Knuckle (KN – available for ALS only).

FAM / FAL - LED Area Light

This luminaire is available in two sizes – large (FAL) and medium (FAM). The FAM can produce over 20,000 lumens, and the FAL can produce over 44,000 lumens. It can be used as a flood light or an area light. The FAM/FAL features an easy access driver compartment. The housing is constructed of die cast aluminum with an integral heat sink, and a chip and fade powder coat finish. The lens is made of UV stabilized polycarbonate. The FAM/FAL can be equipped with a slipfitter knuckle or a trunnion mount.

Applications: Suitable for most exterior flood or area light applications – parking lots, exterior sport courts
Lumen Output: 20,769 in the FAM, 44,740 in the FAL
Max Lumens Per Watt: 108.3 for the FAM, 115.8 for the FAL
Predicted L70 Lifetime: 66,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations

Flood. Medium. Large. HI. Low. High. Optic. F. Forward. 840. 850. SK. TR. Slipfitter knuckle. Trunnion mount. Photocell. BZ. Bronze. Custom color. Colors.

SLM / SLL - LED Street Light

This luminaire is available in two sizes – medium (SLM) and large (SLL). Type II, III, IV and V optics are available. There are multiple mounting options available as well. The SLM/SLL has an easy access driver compartment. A twist lock photocell receptacle is included. A textured powder coat finish, over a chromate conversion coating, covers the die cast aluminum housing. The LED boards and drivers are field-replaceable.

Applications: Suitable for most exterior street or area light applications – street lighting, parking lots, exterior sport courts
Lumen Output: From around 17,300 lm to 35,200 lm
Max Lumens Per Watt: Just under 115
Predicted L70 Lifetime: >100,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations. IP66 rated.

Street light. Medium. Large. HI. High. Optic. Optics. 2. 3. 5. Type II. III. V. 740. 750. TS. AK. UB. Tenon slipfitter. Adjustable knuckle. U-bracket. U bracket. SP. Surge protection. Photocell. PC. R7. Pin twist lock receptacle. EHS. External house side shield. BZ. Bronze. Custom colors. Color.
SLMHI. SLM HI. SL M HI.
SLLHI. SLL HI. SL L HI.

BLx - LED Barn Light

Available in three sizes, the BLx features high performance LED technology and a photocell that comes standard. The housing is constructed of precision die cast aluminum, and features an integral arm mounting hub. It can be wall-mounted or mounted on an extension arm. The refractive, frosted UV-stabilized lens is made of polycarbonate.

Applications: Suitable for exterior site lighting applications: parking lots, loading docks, roadways, barns
Lumen Output: About 2,300 lumens to almost 8,300 lumens
Max Lumens Per Watt: 120.2
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65-rated

WCP - LED Architectural Wall Cylinder

The WCP features sleek architectural styling and high performance LED technology. With two light sources – one up and one down – the WCP is suitable for wall grazing and perimeter/security lighting. The cylinder is constructed of extruded aluminum. The end caps are UV-stabilized polycarbonate. The dark bronze polyester powdercoat finish is chip and fade resistant.

Applications: Suitable for commercial or residential exterior wall mount applications: wall grazing, perimeter/security lighting
Lumen Output: 1,312
Max Lumens Per Watt: 65.3
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

WPP - LED Architectural Wall Pack

The WPP is a high performance LED wall pack suitable for commercial or residential exterior wall mount applications. It features an integral photocell and attractive architectural styling. Both the housing and the frosted white lens are constructed out of impact resistant, UV-stabilized polycarbonate. A detachable mounting plate with hanging wire allows for simple hands-free installation when making electrical connections.

Applications: Suitable for commercial or residential exterior wall mount applications: entryways, perimeter/security lighting
Lumen Output: 958 lumens
Max Lumens Per Watt: 81.2
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

WLP - LED Architectural Wall Pack

The WLP is a high performance LED wall pack suitable for commercial or residential exterior wall mount applications. It features an integral photocell and attractive architectural styling. Both the housing and the frosted white lens are constructed out of impact resistant, UV-stabilized polycarbonate. A detachable mounting plate with hanging wire allows for simple hands-free installation when making electrical connections.

Applications: Suitable for commercial or residential exterior wall mount applications: entryways, perimeter/security lighting
Lumen Output: 932 lumens
Max Lumens Per Watt: 79.5
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

WSP - LED Wall Sconce

The WSP is a high performance LED wall sconce with attractive architectural styling. It features an integral photocell. The front housing is made of impact resistant, UV-stabilized polycarbonate. The bronze back plate is made of die cast aluminum. The frosted white lens is also UV-stabilized and impact resistant polycarbonate.

Applications: Suitable for commercial or residential exterior wall mount applications: entryways, perimeter/security lighting
Lumen Output: 2,030
Max Lumens Per Watt: 99.0
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

Dual control

With the WSP, you can choose between utilizing the dusk to dawn mode (turning on during the nighttime or off during the daytime), or manual switch control.

FWS - LED Flood / Wall Sconce

The highly efficient FWS is functional as an LED wall sconce or flood light. It comes with two mounts for added flexibility – a knuckle mount for ground, wall or eave mounting, and a detachable wall mounting plate that allows for simple installation when making electrical connections. The attractive, modern styling of the FWS makes it a welcome addition to many commercial or residential exterior applications. There are three lumen output packages to choose from. Photocells are optional for the HI (“high”) lumen output package.

Applications: Suitable for commercial or residential exterior ground, wall or eave mount applications: entryways, perimeter/security, landscape lighting
Lumen Output: From 1,510 lm to 5,470 lm
Max Lumens Per Watt: 111.9
Predicted L70 Lifetime: >50,000 hrs
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65-rated

FTS - LED Twin Head Flood Light

The FTS is a high performance LED flood light with attractive architectural styling. Its frosted lens help provide comfortable, glare-free illumination. For mounting, the FTS features a detachable mounting plate with a hanging wire, allowing for hands-free installation when making electrical connections. It is available in bronze or white finish.

Applications: Suitable for commercial or residential exterior wall or eave mount applications: entryways, perimeter/security lighting
Lumen Output: 1,191 lumens
Max Lumens Per Watt: 98.7
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65-rated

twin double dual exterior outside luminaire

WSC - LED Wall Sconce

The WSC is a high performance LED wall sconce suitable for exterior wall mount applications. A photocell comes standard with each luminaire, as does 0-10V dimming drivers. The housing is made of precision die cast aluminum. It is coated in a chip and fade resistant textured powdercoat finish. The lens is frosted glass. The WSC is mounted via a detachable mounting plate on the back box, with a built-in bubble level. It mounts to any standard 3 1/2″ to 4″ square or octagonal, or 4″ round junction box.

Buy Now Request a Quote
Applications: Suitable for exterior wall mount applications
Lumen Output: 5,126
Max Lumens Per Watt: 103.8
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

FSS / FSM - LED Wall Sconce

Available in small (FSS) and medium (FSM) sizes, this luminaire works as both a flood light and a wall sconce. It features multiple mounting methods and four lumen outputs, adding to its versatility and making it suitable for many applications. The housing is made of die cast aluminum. It has a textured powder coat finish over a chromate conversion coating.

Applications: Suitable for most exterior wall mount and flood applications – industrial, retail, commercial
Lumen Output: From 2,300 lm to 8,200 lm
Max Lumens Per Watt: 123
Predicted L70 Lifetime: >76,000 hours at 25-degrees Celsius ambient (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations. IP65-rated

Wall pack. Flood. Small. Medium. Optic. F. PPC120. PPC277. SPC120. SPC277. BPC120. BPC277. 1/2″ inch CdS pencil photocell. 110V-130V. 208V-277V. Button photocell.
CFG. Clear flat glass. 840. Wall mount. AKT. AKS. AUB. Adjustable knuckle. Slipfitter. U-bracket. U bracket. 1/2″ inch NSP threads. Surge protection. Bronze. Custom color.
FSSMD. FSS MD. FS S MD. FSSHI. FSS HI. FS S HI.
FSMMD. FSM MD. FS M MD. FSMHI. FSM HI. FS M HI.

WSx - LED Wall Sconce

Suitable for exterior wall mount applications.
Mounts to standard 4″ square electrical junction box. Alternate junction box mounting possible via universal mounting ring.
Precision die cast aluminum housing. UV stabilized polycarbonate lens. Chip and fade resistant powder coat finish.
UL listed for wet locations. IP65 rated.
5 year limited system warranty.

Applications: Suitable for exterior wall mount applications
Lumen Output: From around 1,600 lm to 7,800 lm
Max Lumens Per Watt: 110.5
Predicted L70 Lifetime: 60,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

WSS. WSM. WSL. WSX.

Wall sconce. Wall pack. Small. Medium. Large. Extra Large. MD. Hi. High. Optic. Optics. F. Forward. 840. PC. Photocell. BZ. Bronze. Custom colors. Color.

WSxE - LED Economy Wall Sconce

The WSxE is available in two sizes: small (WSSE) and medium (WSME). It features high performance LED technology, with 0-10V dimming drivers standard. It can be mounted in an upward or downward orientation. The housing is die cast aluminum with a chip and fade resistant powder coat finish. The lens is UV stabilized polycarbonate. A premium version, with additional sizes and options, is available as the WSx.

Applications: Suitable for exterior wall mount applications
Lumen Output: 1,646 in the WSSE and 2,880 in the WSME
Max Lumens Per Watt: 110.5 (WSSE)
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65-rated

PPC - LED Premium Cutoff Wall Pack

The PPC is a high performance wall pack that features the latest LED technology. With 0-10V dimming drivers standard, the PPC can produce up to 20,000 lumens at efficacies over 100 lumens per watt. The PPC mounts directly over a 4″ recessed outlet box using the hands-free “Easy Hang” wall mount bracket with built-in level (included with the luminaire). Microwave sensors are available. The PPC features a die cast aluminum housing, with a full cutoff front frame and an integral heat sink. The lens is made of vandal resistant polycarbonate.

Buy Now Request a Quote
Applications: Suitable for most exterior wall mount applications – industrial, retail, commercial
Lumen Output: From about 9,700 lm to over 21,000 lm
Max Lumens Per Watt: 113.7
Predicted L70 Lifetime: >100,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations. IP66 rated

Textured powdercoat finish over a
chromate conversion coating
• Nickel-plated stainless steel hardware

SF
DF
SP
EM
MSD
R3
R7
SC
PC(xxxV)
BZ
None
Single Fuse
Double Fuse
Surge Protection (120-277V)
Ni-MH Battery Back-up (90 min.)
(120-277V, LW & MD models only)
Microwave Sensor w/ Dimming (120-277V)
3-Pin Twist Lock Photocell Receptacle
(requires photocell or shorting cap for luminaire operation)
7-Pin Twist Lock Photocell Receptacle
(requires photocell or shorting cap for luminaire operation)
Shorting Cap
Twist Lock Photocell (specify voltage)
Bronze

MSD – Microwave Sensor
motion and daylight day light sensor harvesting

SPC - LED Premium Cutoff Wall Pack

The SPC is an attractive LED wall pack suitable for most exterior wall mount applications. With 0-10V dimming drivers standard, the SPC can produce up to 9,000 lumens with efficacies over 100 lumens per watt. The SPC mounts directly over 4-inch recessed outlet boxes using the included hands-free “Easy-Hang” wall mount bracket with built-in level. An optional trim plate helps cover wall surface blemishes. The MSD is an optional microwave sensor that allows for motion or daylight sensing, with five different light level settings for daylight harvesting. The SPC is constructed of die cast aluminum. The lens is made of vandal-resistant polycarbonate.
Applications: Suitable for most exterior wall mount applications – industrial, retail, commercial
Lumen Output: From about 3,000 lm to just over over 9,200 lm
Max Lumens Per Watt: 119.9
Predicted L70 Lifetime: >100,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations. IP66 rated

Features:
• High performance LED technology
• 0-10V dimming drivers standard
• 2kV (LW), 6kV (MD, HI) internal surge
protection standard
• Up to 9,000 lm, over 100 LPW
• Mounts directly over 4” recessed outlet
box using included hands free “Easy-
Hang” wall mount bracket with built-in
level.
• Optional trim plate available to help
cover wall surface blemishes
• Available Microwave sensor
• Available 3 pin or 7 pin twist lock
receptacle for photocell or smart
controls
Construction:
• Die cast aluminum housing with full
cutoff front frame and integral heat sink
• Vandal resistant Polycarbonate lens
• Textured powdercoat finish over a
chromate conversion coating
• Nickel-plated stainless steel hardware
Applications:
Suitable for most exterior wall mount
applications
• Industrial
• Retail
• Commercial
Warranty:
• 5 year limited system warranty
• see www.LumenFocus.com for
complete warranty terms and
conditions
Certifications:
• CSA listed for wet locations
• IP66
Predicted L70 Lifetime:
• >100,000 hrs (calculated)
• >60,000 hrs (reported)
(based on LM-80, TM-21 and in-situ laboratory
testing)
Ambient Operating Temp:
• -40°C to 50°C
• 0°C to 50°C with EM option

EPC - LED Cutoff Wall Pack

The EPC wall pack features a cast-in template for mounting directly over a 4″ recessed outlet box, or a 1/2″ surface conduit can be used. Die cast aluminum makes up the housing construction. It has a textured powder coat finish over a chromate conversion coating. The EPC has 1/2″ coin plugs with O-rings for conduit and photocell.

Buy Now Request a Quote
Applications: Suitable for most exterior wall mount applications – industrial, retail, commercial
Lumen Output: From 2,000 lm – 6,000 lm
Max Lumens Per Watt: 96.5
Predicted L70 Lifetime: >190,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations. IP55-rated

low medium high 80 CRI 4000K 5000K vandal resistant guard VG stainless steel wire guard WG Type 3 optic optics single double fuse surge protection battery backup back-up EM Ni-MH Photocell 120V 277V bronze BZ

EPM - LED Mini Wall Pack

The EPM features dimmable drivers and includes an integral 120V photocell. It can be mounted directly over a 4″ recessed outlet box – threaded stem and nut are included. The stamped galvanized back plate has a white powder coat finish. A bronze finish adorns the molded polycarbonate front housing.

Applications: Suitable for most exterior wall mount applications – industrial, retail, commercial

Lumen Output: 780 lm

Max Lumens Per Watt: 75.8

Predicted L70 Lifetime: 50,000 hours

Warranty: 5 year limited system warranty

Certifications: CSA listed for wet locations. IP54 certified

LED Mini Wall Pack
EPM LW F UV CPP 850
EPMLWFUVCPP850
PC120 PC277 SF DF Photocell 120V 277V Single Double Fuse
BZ Bronze
F Forward
Clear prismatic polycarbonate
BZ Bronze
850 5000K

WPM - LED Wall Pack

The WPM is a high performance LED wall pack that features an integral photocell and a 0-10V dimming driver standard. It is suitable for many exterior wall mount applications. The housing is covered with a chip and fade resistant powder coat finish in dark bronze.

Applications: Suitable for commercial or residential exterior wall mount applications: entryways, perimeter/security lighting
Lumen Output: 2,468 lumens
Max Lumens Per Watt: 119.8
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

Construction

The WPM features a die-cast aluminum rear housing with an impact-resistant and UV-stabilized polycarbonate front housing. The prismatic lens is also made of impact resistant and UV-stabilized polycarbonate.

EPP - LED Non-Cutoff Wall Pack

The EPP is a highly efficient LED wall pack. A photocell and 0-10V dimming drivers come standard. The housing is constructed of precision die cast aluminum, with a chip and fade resistant textured polyester powdercoat finish in dark bronze. THe lens is made of UV-stabilized borosilicate prismatic glass. Easy knock-outs on the back box of the EPP allow for mounting to any standard 3 1/2-inch to 4-inch square or octagonal, or 4-inch round applications.

Applications: Suitable for exterior wall mount applications
Lumen Output: 6,650 lumens
Max Lumens Per Watt: 132.2
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

EPR - LED Non-Cutoff Wall Pack

The EPR is available in five different lumen packages, with an output ranging from 4,600 lumens to over 15,700 lumens. The clear polycarbonate lens is sealed with a seamless silicone gasket to prevent leaks. The die cast aluminum housing features a dark brown powder coat finish. With the EPR, you get uniform illumination with no visible LED pixilation. Removable threaded plugs allow for side attachment of button photocells or 1/2″ rigid electrical conduit.

Buy Now Request a Quote
Applications: Suitable for most exterior wall mount applications – industrial, retail, commercial
Lumen Output: From about 4,600 lm to over 15,700 lm
Max Lumens Per Watt: 136
Predicted L70 Lifetime: 141,000 hrs
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

Features:
• High performance LED technology
• Uniform illumination with no visible LED
pixilation
• Removable threaded plugs for side
attachment of 1/2” rigid electrical
conduit, or for button photocells
Construction:
• Die cast aluminum housing
• Clear polycarbonate lens with seamless
silicone gasket to prevent leaks
• Dark Bronze powder coat finish
Applications:
Suitable for most exterior wall mount
applications
• Industrial
• Retail
• Commercial
Warranty:
• 5 year limited system warranty
• see www.LumenFocus.com for
complete warranty terms and
conditions
Certifications:
• UL listed for wet locations
• IP65
Predicted L70 Lifetime:
• 141,000 hrs (calculated)
(based on LM-80, TM-21 and in-situ laboratory
testing)
Ambient Operating Temp:
• -20°C to 45°C

EPN - LED Non-Cutoff Wall Pack

The EPN is a high performance LED wall pack that features uniform illumination with no visible LED pixilation. The housing is die cast aluminum with a dark bronze powder coat finish. The tempered borosilicate glass lens is sealed with a seamless silicone gasket to prevent leaks. The EPN has removable threaded plugs for side attachment of 1/2″ rigid electrical conduit, or for button photocells.

Applications: Suitable for most exterior wall mount applications – industrial, retail, commercial
Lumen Output: From about 3,200 lm to over 12,100 lm
Max Lumens Per Watt: 115
Predicted L70 Lifetime: 69,000 hours (LW output model); 59,000 hours (MD output model); 57,000 hours (HI output model); 56,000 hours (VH output model)
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

LW MD HI H low medium high very high
F Forward Optic
TBG tempered borosilicate glass
740 750 840 850 4000K 5000K 70 80 CRI
BPC120 BPC277 button photocell 120V 277V

PGx - LED Parking Garage Canopy Light
The PGx is a highly efficient LED canopy light suitable for most parking garage and canopy applications. It is available in two sizes – small (PGS – 9.5″ x 9.5″) and medium (PGM – 11.8″ x 11.8″).... Read More
CLS - LED Low Profile Canopy Light
The CLS is suitable for indoor or outdoor use. It can be surface or pendant mounted. A junction box mounting plate comes standard. Removable threaded plugs on the side can accommodate rigid electrical conduit or motion/photo sensors. The... Read More
CPG2 - LED Parking Garage Canopy Light
The CPG2 features multi-level control based on motion and/or daylight detection, which allows for maximum energy savings with an optional built-in microwave sensor. This luminaire includes an easy-hang bracket, which fits a standard 4... Read More
CLP - LED Low Profile Canopy Light
The CLP canopy light is available with a quick mount bracket (QMB) for easy installation. The QMB also allows for pendant mounting. It features 1/2″ coin plugs with O-rings for conduit and photocell located on two sides and the bac... Read More
CPE - LED Canopy Light
The CPE is a highly efficient LED canopy luminaire that is suitable for indoor or outdoor use. The housing is constructed of die cast aluminum. The prismatic lens is impact resistant, UV-stabilized polycarbonate. The CPE has a fade-, wea... Read More
GSL - LED Gas Station Canopy Light
The GSL is a highly efficient canopy luminaire designed for typical canopy steel pan structures. It is suitable for most gas station canopy applications. The GSL features high performance LED technology, with efficacies over 140 lumens p... Read More
CSM / CSL - LED Canopy Light
This luminaire is offered in two sizes – medium (CSM) and large (CSL). The die cast aluminum housing features a textured powder coat finish over a chromate conversion coating. It features 1/2″ coin plugs with O-rings for cond... Read More
AMx - LED Multi-Purpose Area Light
The AMx is a versatile, multi-purpose LED area light available in two sizes – medium (AMM) and large (AML). There are multiple mounting options available, as well as multiple roadway and floodlight optics, making the AMx suitable f... Read More
AFL - LED Flood Light
The AFL features high performance, highly efficient LED technology. It is suitable for many exterior site lighting applications. A photocell comes standard, as do 0-10V dimming drivers. There are two mounts to choose from: the Extension ... Read More
FLx - LED Flood / Spot Light
The FLx is offered in a variety of lumen packages and sizes. There are multiple mounting configurations for maximum versatility. The housing is made of precision die cast aluminum with an integral heat sink, with a chip and fade resistan... Read More
FSS / FSM - LED Flood Light
Available in small (FSS) and medium (FSM) sizes, this luminaire works as both a flood light and a wall sconce. It features multiple mounting methods and four lumen outputs, adding to its versatility and making it suitable for many applic... Read More
PFx - LED Power Flood Light
The PFx is offered in a variety of sizes and lumen packages. Lumen output ranges from 2,030 in the smallest option (PF1), up to nearly 33,000 lumens in the largest option (PF5). A chip and fade resistant power coat finish adorns the die ... Read More
PFxE - LED Economy Flood Light
The PFxE is an efficient LED flood light suitable for exterior use. It comes in two sizes. The PF1E is a 20-watt luminaire producing 2,148 lumens. the PF2E is a 50-watt unit producing 5,006 lumens. The PFxE features wide beam flood distr... Read More
FWS - LED Flood / Wall Sconce
The highly efficient FWS is functional as an LED wall sconce or flood light. It comes with two mounts for added flexibility – a knuckle mount for ground, wall or eave mounting, and a detachable wall mounting plate that allows for s... Read More
FTS - LED Twin Head Flood Light
The FTS is a high performance LED flood light with attractive architectural styling. Its frosted lens help provide comfortable, glare-free illumination. For mounting, the FTS features a detachable mounting plate with a hanging wire, allo... Read More
FAM / FAL - LED Power Flood Light
This luminaire is available in two sizes – large (FAL) and medium (FAM). The FAM can produce over 20,000 lumens, and the FAL can produce over 44,000 lumens. It can be used as a flood light or an area light. The FAM/FAL features an ... Read More
AMx - LED Multi-Purpose Area Light
The AMx is a versatile, multi-purpose LED area light available in two sizes – medium (AMM) and large (AML). There are multiple mounting options available, as well as multiple roadway and floodlight optics, making the AMx suitable f... Read More
AFL - LED Area Light
The AFL features high performance, highly efficient LED technology. It is suitable for many exterior site lighting applications. A photocell comes standard, as do 0-10V dimming drivers. There are two mounts to choose from: the Extension ... Read More
APM / APL - LED Street / Area Light
This area light is available in two size – large (APL) and medium (APM). It features multiple mounting options for maximum versatility. The APM/APL has an industrial grade 3 or 5 pin photocell receptacle. The housing features die ... Read More
ALx - LED Area Light
The ALx area light is a versatile luminaire available in four sizes – small (ALS), medium (ALM), large (ALL), and extra large (ALX). A wide variety of mounting options and optics are available, depending on the size selected (view ... Read More
FAM / FAL - LED Area Light
This luminaire is available in two sizes – large (FAL) and medium (FAM). The FAM can produce over 20,000 lumens, and the FAL can produce over 44,000 lumens. It can be used as a flood light or an area light. The FAM/FAL features an ... Read More
SLM / SLL - LED Street Light
This luminaire is available in two sizes – medium (SLM) and large (SLL). Type II, III, IV and V optics are available. There are multiple mounting options available as well. The SLM/SLL has an easy access driver compartment. A twis... Read More
BLx - LED Barn Light
Available in three sizes, the BLx features high performance LED technology and a photocell that comes standard. The housing is constructed of precision die cast aluminum, and features an integral arm mounting hub. It can be wall-mounted ... Read More
WCP - LED Architectural Wall Cylinder
The WCP features sleek architectural styling and high performance LED technology. With two light sources – one up and one down – the WCP is suitable for wall grazing and perimeter/security lighting. The cylinder is constructe... Read More
WPP - LED Architectural Wall Pack
The WPP is a high performance LED wall pack suitable for commercial or residential exterior wall mount applications. It features an integral photocell and attractive architectural styling. Both the housing and the frosted white lens are ... Read More
WLP - LED Architectural Wall Pack
The WLP is a high performance LED wall pack suitable for commercial or residential exterior wall mount applications. It features an integral photocell and attractive architectural styling. Both the housing and the frosted white lens are ... Read More
WSP - LED Wall Sconce
The WSP is a high performance LED wall sconce with attractive architectural styling. It features an integral photocell. The front housing is made of impact resistant, UV-stabilized polycarbonate. The bronze back plate is made of die cast... Read More
FWS - LED Flood / Wall Sconce
The highly efficient FWS is functional as an LED wall sconce or flood light. It comes with two mounts for added flexibility – a knuckle mount for ground, wall or eave mounting, and a detachable wall mounting plate that allows for s... Read More
FTS - LED Twin Head Flood Light
The FTS is a high performance LED flood light with attractive architectural styling. Its frosted lens help provide comfortable, glare-free illumination. For mounting, the FTS features a detachable mounting plate with a hanging wire, allo... Read More
WSC - LED Wall Sconce
The WSC is a high performance LED wall sconce suitable for exterior wall mount applications. A photocell comes standard with each luminaire, as does 0-10V dimming drivers. The housing is made of precision die cast aluminum. It is coated ... Read More
FSS / FSM - LED Wall Sconce
Available in small (FSS) and medium (FSM) sizes, this luminaire works as both a flood light and a wall sconce. It features multiple mounting methods and four lumen outputs, adding to its versatility and making it suitable for many applic... Read More
WSx - LED Wall Sconce
Suitable for exterior wall mount applications. Mounts to standard 4″ square electrical junction box. Alternate junction box mounting possible via universal mounting ring. Precision die cast aluminum housing. UV stabiliz... Read More
WSxE - LED Economy Wall Sconce
The WSxE is available in two sizes: small (WSSE) and medium (WSME). It features high performance LED technology, with 0-10V dimming drivers standard. It can be mounted in an upward or downward orientation. The housing is die cast aluminu... Read More
PPC - LED Premium Cutoff Wall Pack
The PPC is a high performance wall pack that features the latest LED technology. With 0-10V dimming drivers standard, the PPC can produce up to 20,000 lumens at efficacies over 100 lumens per watt. The PPC mounts directly over a 4″... Read More
SPC - LED Premium Cutoff Wall Pack
The SPC is an attractive LED wall pack suitable for most exterior wall mount applications. With 0-10V dimming drivers standard, the SPC can produce up to 9,000 lumens with efficacies over 100 lumens per watt. The SPC mounts directly over... Read More
EPC - LED Cutoff Wall Pack
The EPC wall pack features a cast-in template for mounting directly over a 4″ recessed outlet box, or a 1/2″ surface conduit can be used. Die cast aluminum makes up the housing construction. It has a textured powder coat fini... Read More
EPM - LED Mini Wall Pack
The EPM features dimmable drivers and includes an integral 120V photocell. It can be mounted directly over a 4″ recessed outlet box – threaded stem and nut are included. The stamped galvanized back plate has a white powder coat finis... Read More
WPM - LED Wall Pack
The WPM is a high performance LED wall pack that features an integral photocell and a 0-10V dimming driver standard. It is suitable for many exterior wall mount applications. The housing is covered with a chip and fade resistant powder c... Read More
EPP - LED Non-Cutoff Wall Pack
The EPP is a highly efficient LED wall pack. A photocell and 0-10V dimming drivers come standard. The housing is constructed of precision die cast aluminum, with a chip and fade resistant textured polyester powdercoat finish in dark bron... Read More
EPR - LED Non-Cutoff Wall Pack
The EPR is available in five different lumen packages, with an output ranging from 4,600 lumens to over 15,700 lumens. The clear polycarbonate lens is sealed with a seamless silicone gasket to prevent leaks. The die cast aluminum housing... Read More
EPN - LED Non-Cutoff Wall Pack
The EPN is a high performance LED wall pack that features uniform illumination with no visible LED pixilation. The housing is die cast aluminum with a dark bronze powder coat finish. The tempered borosilicate glass lens is sealed with a ... Read More

Hover over your state to find a sales rep near you.
AL AK AZ AR CA CO CT DE FL GA HI ID IL IN IA KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA RI SC SD TN TX UT VT VA WA WV WI WY DC
CANADA
For Distributors in Alberta:
GOTO AGENCIES | Edmonton, Alberta | Phone: (780) 224-1279 | www.gotoagencies.com
Click here to download our Sales Network directory.

Click here to download full .pdf catalog (~79 MB)


Click on a link below to download the files you need. Hover over a product name in the first column to view an image of that product.
Click on a link below to download the files you need. Tap a product name in the first column to view an image of that product. Tap again to collapse.
ProductCategoryTypeSpec SheetPhotometry FilesProduct Page Link
AFLLED OutdoorArea/Flood Light Download Spec .ies | .pdf Product Page
ALLLED OutdoorArea Light Download Spec .ies | .pdf Product Page
ALMLED OutdoorArea Light Download Spec .ies | .pdf Product Page
ALSLED OutdoorArea Light Download Spec .ies | .pdf Product Page
ALXLED OutdoorArea Light Download Spec .ies | .pdf Product Page
AMxLED OutdoorMulti-Purpose Area Download Spec .ies | .pdf Product Page
APM/APLLED OutdoorStreet/Area Light Download Spec .ies | .pdf Product Page
BLxLED OutdoorBarn Light Download Spec .ies | .pdf Product Page
CLPLED OutdoorCanopy Download Spec .ies | .pdf Product Page
CLSLED OutdoorCanopy Download Spec .ies | .pdf Product Page
CPELED OutdoorCanopy Download Spec .ies | .pdf Product Page
CPG2LED OutdoorCanopy Download Spec .ies | .pdf Product Page
CSM/CSLLED OutdoorCanopy Download Spec .ies | .pdf Product Page
DEMLED SpecialtyExit/Emergency Download Spec .ies | .pdf Product Page
DLALED IndoorDown Light Download Spec Contact Factory Product Page
DLE 4LED IndoorEconomy Down Light Download Spec Contact Factory Product Page
DLE 56LED IndoorEconomy Down Light Download Spec Contact Factory Product Page
DLG 4LED IndoorLED Gimbal Down Light Download Spec Contact Factory Product Page
DLG 56LED IndoorLED Gimbal Down Light Download Spec Contact Factory Product Page
DLL 3.5LED IndoorDown Light Download Spec Contact Factory Product Page
DLL 4LED IndoorDown Light Download Spec Contact Factory Product Page
DLL 56LED IndoorDown Light Download Spec Contact Factory Product Page
EBLLED IndoorLow Bay Download Spec .ies | .pdf Product Page
ECLLED IndoorStrip Download Spec .ies | .pdf Product Page
ECLNLED IndoorNarrow Strip Download Spec Contact Factory Product Page
EDLLED SpecialtyExit/Emergency Download Spec .ies | .pdf Product Page
ELRLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
ELXLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMELED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMEWLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMRWLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMWLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMXLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EPCLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
EPMLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
EPNLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
EPPLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
EPRLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
ETLLED IndoorTroffer Download Spec .ies | .pdf Product Page
EVLLED IndoorVanity Wrap Download Spec Contact Factory Product Page
EVTLED IndoorVaportight Download Spec .ies | .pdf Product Page
EWLLED IndoorWrap Download Spec Contact Factory Product Page
FAM/FALLED OutdoorArea/Flood Download Spec .ies | .pdf Product Page
FFLLED IndoorLay-In Download Spec .ies | .pdf Product Page
FFL2R HOLED IndoorHigh Output Lay-In Download Spec .ies | .pdf Product Page
FFL2RLED IndoorLay-In Download Spec .ies | .pdf Product Page
FFLPLED IndoorIndustrial Download Spec Contact Factory Product Page
FFRLED IndoorTroffer Retrofit Download Spec .ies | .pdf Product Page
FFRPLED IndoorIndustrial Retrofit Download Spec Contact Factory Product Page
FFRWLED IndoorWrap Retrofit Download Spec .ies | .pdf Product Page
FLxLED OutdoorFlood/Spot Download Spec .ies | .pdf Product Page
FPLLED IndoorFlat Panel Download Spec .ies | .pdf Product Page
FSS/FSMLED OutdoorFlood/Sconce Download Spec .ies | .pdf Product Page
FTSLED OutdoorFlood/Wall Mount Download Spec .ies | .pdf Product Page
FWSLED OutdoorFlood/Sconce Download Spec .ies | .pdf Product Page
GATLED IndoorIndirect High Bay Download Spec .ies | .pdf Product Page
GLLLED IndoorGrow Light Download Spec .ies | .pdf Product Page
GSLLED OutdoorCanopy Download Spec .ies | .pdf Product Page
HZL1LED SpecialtyHazardous Location Download Spec .ies | .pdf Product Page
HZL2LED SpecialtyHazardous Location Download Spec .ies | .pdf Product Page
HZL4LED SpecialtyHazardous Location Download Spec .ies | .pdf Product Page
LEMLED SpecialtyExit/Emergency Download Spec .ies | .pdf Product Page
LEXLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
NVLLED IndoorVaportight Download Spec .ies | .pdf Product Page
NVLFLED IndoorVaportight Download Spec Contact Factory Product Page
PBLLED IndoorHigh Bay Download Spec .ies | .pdf Product Page
PBLALED IndoorAisle High/Low Bay Download Spec .ies | .pdf Product Page
PBLHDLED IndoorHeavy Duty High Bay Download Spec .ies | .pdf Product Page
PBLULED IndoorHigh Bay w/ Uplight Download Spec .ies | .pdf Product Page
PBLXLED IndoorHigh Bay Download Spec Contact Factory Product Page
PFxLED OutdoorFlood Download Spec .ies | .pdf Product Page
PFxELED OutdoorFlood Download Spec .ies | .pdf Product Page
PGxLED OutdoorCanopy Download Spec .ies | .pdf Product Page
PPCLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
RCLLED IndoorStrip Retrofit Download Spec .ies | .pdf Product Page
RCLSLED IndoorStrip Retrofit Download Spec Contact Factory Product Page
REHLED SpecialtyRemote Lamp Head Download Spec .ies | .pdf Product Page
RLK T22LED IndoorTroffer Retrofit Download Spec .ies | .pdf Product Page
RLK T24LED IndoorTroffer Retrofit Download Spec .ies | .pdf Product Page
RLK W2LED IndoorWrap Retrofit Download Spec Contact Factory Product Page
RLK W4LED IndoorWrap Retrofit Download Spec Contact Factory Product Page
RTLLED IndoorTroffer Retrofit Download Spec .ies | .pdf Product Page
SLM/SLLLED OutdoorStreet Light Download Spec .ies | .pdf Product Page
SPCLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
VPJELED SpecialtyVaporproof Download Spec .ies | .pdf Product Page
WCPLED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WLELED SpecialtyWet Location Exit Download Spec Not Applicable Product Page
WLPLED OutdoorArchitectural Wall Pack Download Spec .ies | .pdf Product Page
WPMLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
WPPLED OutdoorArchitectural Wall Pack Download Spec .ies | .pdf Product Page
WSCLED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WSPLED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WSxLED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WSxELED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WVL2LED IndoorVaportight Download Spec .ies | .pdf Product Page
WVL4LED IndoorVaportight Download Spec .ies | .pdf Product Page
WVLFLED IndoorVaportight Download Spec .ies | .pdf Product Page
Note for mobile users: Table scrolls horizontally.
ProductCategoryTypeSpec SheetPhotometry FilesProduct Page Link
AFLLED OutdoorArea/Flood Light Download Spec .ies | .pdf Product Page
ALLLED OutdoorArea Light Download Spec .ies | .pdf Product Page
ALMLED OutdoorArea Light Download Spec .ies | .pdf Product Page
ALSLED OutdoorArea Light Download Spec .ies | .pdf Product Page
ALXLED OutdoorArea Light Download Spec .ies | .pdf Product Page
AMxLED OutdoorMulti-Purpose Area Download Spec .ies | .pdf Product Page
APM/APLLED OutdoorStreet/Area Light Download Spec .ies | .pdf Product Page
BLxLED OutdoorBarn Light Download Spec .ies | .pdf Product Page
CLPLED OutdoorCanopy Download Spec .ies | .pdf Product Page
CLSLED OutdoorCanopy Download Spec .ies | .pdf Product Page
CPELED OutdoorCanopy Download Spec .ies | .pdf Product Page
CPG2LED OutdoorCanopy Download Spec .ies | .pdf Product Page
CSM/CSLLED OutdoorCanopy Download Spec .ies | .pdf Product Page
DEMLED SpecialtyExit/Emergency Download Spec .ies | .pdf Product Page
DLALED IndoorDown Light Download Spec Contact Factory Product Page
DLE 4LED IndoorEconomy Down Light Download Spec Contact Factory Product Page
DLE 56LED IndoorEconomy Down Light Download Spec Contact Factory Product Page
DLG 4LED IndoorLED Gimbal Down Light Download Spec Contact Factory Product Page
DLG 56LED IndoorLED Gimbal Down Light Download Spec Contact Factory Product Page
DLL 3.5LED IndoorDown Light Download Spec Contact Factory Product Page
DLL 4LED IndoorDown Light Download Spec Contact Factory Product Page
DLL 56LED IndoorDown Light Download Spec Contact Factory Product Page
EBLLED IndoorLow Bay Download Spec .ies | .pdf Product Page
ECLLED IndoorStrip Download Spec .ies | .pdf Product Page
ECLNLED IndoorNarrow Strip Download Spec Contact Factory Product Page
EDLLED SpecialtyExit/Emergency Download Spec .ies | .pdf Product Page
ELRLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
ELXLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMELED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMEWLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMRWLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMWLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EMXLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
EPCLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
EPMLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
EPNLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
EPPLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
EPRLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
ETLLED IndoorTroffer Download Spec .ies | .pdf Product Page
EVLLED IndoorVanity Wrap Download Spec Contact Factory Product Page
EVTLED IndoorVaportight Download Spec .ies | .pdf Product Page
EWLLED IndoorWrap Download Spec Contact Factory Product Page
FAM/FALLED OutdoorArea/Flood Download Spec .ies | .pdf Product Page
FFLLED IndoorLay-In Download Spec .ies | .pdf Product Page
FFL2R HOLED IndoorHigh Output Lay-In Download Spec .ies | .pdf Product Page
FFL2RLED IndoorLay-In Download Spec .ies | .pdf Product Page
FFLPLED IndoorIndustrial Download Spec Contact Factory Product Page
FFRLED IndoorTroffer Retrofit Download Spec .ies | .pdf Product Page
FFRPLED IndoorIndustrial Retrofit Download Spec Contact Factory Product Page
FFRWLED IndoorWrap Retrofit Download Spec .ies | .pdf Product Page
FLxLED OutdoorFlood/Spot Download Spec .ies | .pdf Product Page
FPLLED IndoorFlat Panel Download Spec .ies | .pdf Product Page
FSS/FSMLED OutdoorFlood/Sconce Download Spec .ies | .pdf Product Page
FTSLED OutdoorFlood/Wall Mount Download Spec .ies | .pdf Product Page
FWSLED OutdoorFlood/Sconce Download Spec .ies | .pdf Product Page
GATLED IndoorIndirect High Bay Download Spec .ies | .pdf Product Page
GLLLED IndoorGrow Light Download Spec .ies | .pdf Product Page
GSLLED OutdoorCanopy Download Spec .ies | .pdf Product Page
HZL1LED SpecialtyHazardous Location Download Spec .ies | .pdf Product Page
HZL2LED SpecialtyHazardous Location Download Spec .ies | .pdf Product Page
HZL4LED SpecialtyHazardous Location Download Spec .ies | .pdf Product Page
LEMLED SpecialtyExit/Emergency Download Spec .ies | .pdf Product Page
LEXLED SpecialtyExit/Emergency Download Spec Not Applicable Product Page
NVLLED IndoorVaportight Download Spec .ies | .pdf Product Page
NVLFLED IndoorVaportight Download Spec Contact Factory Product Page
PBLLED IndoorHigh Bay Download Spec .ies | .pdf Product Page
PBLALED IndoorAisle High/Low Bay Download Spec .ies | .pdf Product Page
PBLHDLED IndoorHeavy Duty High Bay Download Spec .ies | .pdf Product Page
PBLULED IndoorHigh Bay w/ Uplight Download Spec .ies | .pdf Product Page
PBLXLED IndoorHigh Bay Download Spec Contact Factory Product Page
PFxLED OutdoorFlood Download Spec .ies | .pdf Product Page
PFxELED OutdoorFlood Download Spec .ies | .pdf Product Page
PGxLED OutdoorCanopy Download Spec .ies | .pdf Product Page
PPCLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
RCLLED IndoorStrip Retrofit Download Spec .ies | .pdf Product Page
RCLSLED IndoorStrip Retrofit Download Spec Contact Factory Product Page
REHLED SpecialtyRemote Lamp Head Download Spec .ies | .pdf Product Page
RLK T22LED IndoorTroffer Retrofit Download Spec .ies | .pdf Product Page
RLK T24LED IndoorTroffer Retrofit Download Spec .ies | .pdf Product Page
RLK W2LED IndoorWrap Retrofit Download Spec Contact Factory Product Page
RLK W4LED IndoorWrap Retrofit Download Spec Contact Factory Product Page
RTLLED IndoorTroffer Retrofit Download Spec .ies | .pdf Product Page
SLM/SLLLED OutdoorStreet Light Download Spec .ies | .pdf Product Page
SPCLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
VPJELED SpecialtyVaporproof Download Spec .ies | .pdf Product Page
WCPLED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WLELED SpecialtyWet Location Exit Download Spec Not Applicable Product Page
WLPLED OutdoorArchitectural Wall Pack Download Spec .ies | .pdf Product Page
WPMLED OutdoorWall Pack Download Spec .ies | .pdf Product Page
WPPLED OutdoorArchitectural Wall Pack Download Spec .ies | .pdf Product Page
WSCLED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WSPLED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WSxLED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WSxELED OutdoorWall Sconce Download Spec .ies | .pdf Product Page
WVL2LED IndoorVaportight Download Spec .ies | .pdf Product Page
WVL4LED IndoorVaportight Download Spec .ies | .pdf Product Page
WVLFLED IndoorVaportight Download Spec .ies | .pdf Product Page