5
Yes
None
1
1000000
Search...
/products/

Catalog

Thumbnail
Filter
Clear All
Sort By:

Categories:

+
+
+

View All:

Lumen Output:

Product Family:

Certifications and features:

PGx - LED Parking Garage Canopy Light

The PGx is a highly efficient LED canopy light suitable for most parking garage and canopy applications. It is available in two sizes – small (PGS – 9.5″ x 9.5″) and medium (PGM – 11.8″ x 11.8″). An optional microwave sensor maximizes energy savings by providing multi-level control based on motion and/or daylight detection. The housing is constructed of die cast aluminum, and it comes in a bronze or white powdercoat finish. The lens is polycarbonate.

Buy Now Request a Quote
Applications: Suitable for most parking garage and canopy applications
Lumen Output: From 3,100 in the PGS up to 12,700 in the PGM
Max Lumens Per Watt: 131
Predicted L70 Lifetime: >150,000 hrs
Warranty: 5 year limited system warranty
Certifications: cULus listed for wet locations. IP65 rated

High performance LED technology
• 0-10V dimming drivers standard on all
models except PGS LW
• 2kV surge protection on PGS LW, 4kV surge
protection on all other models. 10kV surge
protection optional.
• Can be surface or pendant mounted for
added flexibility
• Multi-level control based on motion and/or
daylight detection allows for maximum
energy savings with optional microwave
sensor.
Construction:
• Die cast aluminum housing
• Polycarbonate lens
• Bronze or white powdercoat finish
Applications:
Suitable for most parking garage and canopy
applications.
Warranty:
• 5 year limited system warranty
• see www.LumenFocus.com for complete
warranty terms and conditions

MSD Microwave daylight motion sensor dimming bronze white

CLS - LED Low Profile Canopy Light

The CLS is suitable for indoor or outdoor use. It can be surface or pendant mounted. A junction box mounting plate comes standard. Removable threaded plugs on the side can accommodate rigid electrical conduit or motion/photo sensors. The MSD is an optional IP65-rated microwave dimming motion/daylight sensor. The die cast aluminum housing of the CLS is covered with a durable dark bronze powder coat finish. The drop lens is made of impact resistant polycarbonate. The CLS is available in two sizes – 10-inch square (CLS 10) and 14-inch square (CLS 14).

Applications: For use in surface or pendant mount applications. Suitable for indoor or outdoors use: canopy, security, stairwell, corridors
Lumen Output: 4,948 in the CLS 10 and 9,548 in the CLS 14
Max Lumens Per Watt: 120
Predicted L70 Lifetime: ≥ 60,000 hrs
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated

CPG2 - LED Parking Garage Canopy Light

The CPG2 features multi-level control based on motion and/or daylight detection, which allows for maximum energy savings with an optional built-in microwave sensor. This luminaire includes an easy-hang bracket, which fits a standard 4″ electrical box, allowing for one-person installation. An optional quick mount pendant bracket is available. The CPG2 sports a low-profile aluminum housing, a UV-stabilized clear acrylic lens, and is available in a bronze or white powder coat finish.

Applications: Suitable for most parking garage applications
Lumen Output: 3,630-6,444 lm
Max Lumens Per Watt: 120
Predicted L70 Lifetime: >100,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations (damp locations when used with quick mount bracket). IP66 certified.

CLP - LED Low Profile Canopy Light

The CLP canopy light is available with a quick mount bracket (QMB) for easy installation. The QMB also allows for pendant mounting. It features 1/2″ coin plugs with O-rings for conduit and photocell located on two sides and the back. The die cast aluminum housing features a textured powder coat finish over a chromate conversion coating. Suitable for most exterior canopy applications – industrial, retail, commercial.
Over 100 lumens per watt.
Available quick mount bracket (QMB) for easy installation. QMB also allows for pendant mounting.
1/2″ coin plugs with O-rings for conduit and photocell located on two sides and back.
Die cast aluminum housing. Textured powder coat finish over a chromate conversion coating.
Predicted L70 lifetime: greater than 60,000 hours at 25-degrees Celsium ambient.
CSA listed for wet locations (damp locations when used with quick mounting bracket).
5 year limited system warranty.

CLP-PAD. PPC120. PPC277. SPC120. SPC277. BPC120. BPC277. Replacement PAD lens for CSM. 1/2″ inch CdS pencil photocell 110V-130V. 208V-277V. 110V-130V. 208V-277V. Button photocell.
MD. Medium. PAD shielding. Prismatic acrylic drop lens. 840. 850. SP. Surge protection. BZ. Bronze. Custom colors.
CLPMD. CLP MD.

GSL - LED Gas Station Canopy Light

The GSL is a highly efficient canopy designed for typical canopy steel pan structures. It is suitable for most gas station canopy applications. The GSL features high performance LED technology, with efficacies over 100 lumens per watt. The housing of the GSL is made of die cast aluminum, and features a textured powder coat finish over a chromate conversion coating. The flat glass lens is tempered glass. The housing is designed to emulate legacy HID canopy lights that mount through a 4″ minimum diameter cut hole in the canopy. A galvanized steel back plate is provided to allow for installation over larger holes.

Applications: Suitable for most gas station canopy applications
Lumen Output: 17,904lm
Max Lumens Per Watt: 141
Predicted L70 Lifetime: >100,000 hours (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations (damp locations when used with quick mount bracket). IP66 rated.

CSM / CSL - LED Canopy Light

This luminaire is offered in two sizes – medium (CSM) and large (CSL). The die cast aluminum housing features a textured powder coat finish over a chromate conversion coating. It features 1/2″ coin plugs with O-rings for conduit and photocell located on two sides and the back. The CSL is available with a quick mount bracket (QMB) for easy installation. The QMB also allows for pendant mounting.

Buy Now Request a Quote
Applications: Suitable for most exterior canopy applications – industrial, retail, commercial
Lumen Output: From 3,200 lm – 6,200 lm
Max Lumens Per Watt: 127.5
Predicted L70 Lifetime: >100,000 hours at 25-degree Celsius ambient (calculated)
Warranty: 5 year limited system warranty
Certifications: CSA listed for wet locations (damp locations when used with quick mount bracket).

PGx - LED Parking Garage Canopy Light
The PGx is a highly efficient LED canopy light suitable for most parking garage and canopy applications. It is available in two sizes – small (PGS – 9.5″ x 9.5″) and medium (PGM – 11.8″ x 11.8″).... Read More
CLS - LED Low Profile Canopy Light
The CLS is suitable for indoor or outdoor use. It can be surface or pendant mounted. A junction box mounting plate comes standard. Removable threaded plugs on the side can accommodate rigid electrical conduit or motion/photo sensors. The... Read More
CPG2 - LED Parking Garage Canopy Light
The CPG2 features multi-level control based on motion and/or daylight detection, which allows for maximum energy savings with an optional built-in microwave sensor. This luminaire includes an easy-hang bracket, which fits a standard 4... Read More
CLP - LED Low Profile Canopy Light
The CLP canopy light is available with a quick mount bracket (QMB) for easy installation. The QMB also allows for pendant mounting. It features 1/2″ coin plugs with O-rings for conduit and photocell located on two sides and the bac... Read More
GSL - LED Gas Station Canopy Light
The GSL is a highly efficient canopy designed for typical canopy steel pan structures. It is suitable for most gas station canopy applications. The GSL features high performance LED technology, with efficacies over 100 lumens per watt. T... Read More
CSM / CSL - LED Canopy Light
This luminaire is offered in two sizes – medium (CSM) and large (CSL). The die cast aluminum housing features a textured powder coat finish over a chromate conversion coating. It features 1/2″ coin plugs with O-rings for cond... Read More