Products

The PBL is better than ever! This line of premium high bay luminaires is available in many of the same output packages as our standard PBL, but with even higher efficacies! Improved LED technology has allowed us to increase lumens per watt across the board. Like the standard PBL, the G2 is available in a wide variety of sizes, lumen output packages and control options. Diffuser lenses are available to minimize glare and improve aesthetics. The housing is precision brake formed from aluminum and pre-painted with a highly durable, highly reflective white finish. Several control options – including IoT-compatible sensors – can be incorporated. Every PBL G2 is made in the USA – in our Henderson, NC facility, utilizing mostly domestic and some foreign components.
At up to 179.5 lumens per watt, it’s our most efficient product to date!
Applications: Suitable for most commercial, industrial and institutional applications – retail, warehouse, manufacturing, cold/frozen storage
Lumen Output: From around 11,000 in the PBL G2 2 to over 53,000 in the PBL G2 4W
Max Lumens Per Watt: 179.5 LPW in the 2W model; 170.1 in the standard 2′; 179.0 LPW in the 4W model; 178.4 in the standard 4′
Size Options: Available in 4-foot and 2-foot, standard and wide widths
Finish Options: Available in White (Standard), Matte Black and Metallic Silver
Predicted L70 Lifetime: Greater than 188,000 hours (calculated)
Predicted L90 Lifetime: Greater than 60,000 hours (reported)
Warranty: 5 year limited system warranty. 10-year extended warranty available on specific models
Re-BoardABILITY: Every PBL G2 is upgradeable. Boards and drivers can easily be swapped out for upgrade in a matter of minutes. Learn more about Re-Boardability here.
Certifications: UL 1598 listed for US and Canada, suitable for damp locations. DesignLights Consortium qualified on specific configurations
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components. BAA compliant options are available

Variety & versatility

The PBL G2 is available in a wide range of sizes and lumen packages, allowing us to ensure you get the light level you need. The G2 is available with several mounting options, control solutions, and many other options. See our spec sheets for more details.

All the control you need
Maximize the savings potential of your PBL G2 with one of our many control options. The Wattstopper FSP sensor equips your PBL G2 with multi-level control based on motion and/or daylight contribution. Rated for both wet and cold locations, every FSP comes pre-installed and pre-wired on the end cap. Three different lenses are available, tailored for the ideal detection area and mounting height. All parameters can be adjusted from the floor via a wireless configuration tool (the FSIR-100 – sold separately). The Bluetooth-enabled FSP-321B, also available for the PBL, is adjustable via iOS or Android app.
The PBL G2 is also available with an optional on/off occupancy sensor (option “OS”). With the Leviton OSFHU-ITW (or an equivalent), each individual PBL G2 can be controlled based on occupancy in its detection zone. For added energy savings through daylight harvesting, an occupancy sensor with photocell (option “OSP”) is available. The OSP turns the luminaire on or off based on occupancy or available natural light.

IoT compatibility
We offer more robust network control options and Internet of Things (IoT) compatibility with products from Enlighted and Leviton. Contact us for more info. Also, if there’s another control system you’re looking for – such as Nedap, Daintree, or another IoT-based system – just contact us. We can incorporate it.

The PBL G2 HD is the newest version of our heavy duty high bay luminaire. The G2 has all the same features of the standard PBLHD, but with higher efficacy LED boards! Just like the PBL G2 LED high bay, the PBL G2 HD boasts efficacies up to 179.5 lumens per watt! Designed for areas where the luminaire may be struck, the housing is constructed of sturdy 0.063″ aluminum. Wireguards are optional for added durability. Pendant, surface and cable mounting options are available. Similar to the PBL, there is a wide range of lumen outputs and several control options. Frosted diffusers are available to minimize glare and improve aesthetics. Every PBL G2 HD is made in the USA – in our Henderson, NC facility, utilizing mostly domestic and some foreign components.
Applications: Suitable for most commercial and institutional applications – ideal for gymnasiums, recreation centers, manufacturing, warehouse
Lumen Output: From around 11,000 in the PBL G2 2 to over 53,000 in the PBL G2 4W
Max Lumens Per Watt: 179.5 LPW in the 2W model; 170.1 in the standard 2′; 179.0 LPW in the 4W model; 178.4 in the standard 4′
Size Options: Available in 4-foot and 2-foot
Finish Options: Available in White (Standard), Matte Black and Metallic Silver
Predicted L70 Lifetime: Greater than 188,000 hours (calculated)
Predicted L90 Lifetime: Greater than 60,000 hours (reported)
Warranty: 5 year limited system warranty. 10-year extended warranty available on specific models
Re-BoardABILITY: Every PBLHD is upgradeable. Boards and drivers can easily be swapped out for upgrade in a matter of minutes. Learn more about Re-Boardability here.
Certifications: UL 1598 listed for US and Canada, suitable for damp locations
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components. BAA compliant options are available

The PBLHD G2 can be surface-mounted, cable-mounted or pendant-mounted. The 4-foot version is offered with a stabilizer option (pictured). For surface mounting, the center portion of the LED tray can easily be removed to access the mounting holes underneath (see spec sheet for more information). Cable kits come pre-looped for easy installation and are designed for easy fixture height adjustment.

The FFLD utilizes high performance disinfecting LEDs from IllumiPure. These LEDs continuously disinfect hard or soft surfaces, killing 99.9 percent of bacteria when the lights are kept on. IllumiPure LEDs are effective against MRSA, C. Difficile, Salmonella and E. Coli. Because IllumiPure LEDs are part of the normal visible LED spectrum (near-UV wavelength), the FFLD is completely harmless to humans and animals. You can remain working while the FFLD cleanses the room! The FFLD utilizes a frosted diffuser that is designed to balance efficiency, aesthetics, and disinfecting performance. The housing is die-formed heavy-gauge cold rolled steel, with a precision brake-formed aluminum LED tray and a highly reflective white enamel finish. A matching retrofit kit, the FFRD, is also available. The FFLD is part of the UVFocus line of pathogen eradicating luminaires. Every FFLD is made in the USA – in our Henderson, NC facility, utilizing mostly domestic and some foreign components.
Note: These UVFocus products are designed utilizing proven anti-bacterial technology. UVC 405nm near-UV products are shown to substantially reduce bacterial presence. While these products can be considered disinfecting products, they should be used in conjunction with standard, proper disinfecting cleaning procedures to have the greatest impact for maintaining a clean environment. Successful disinfection requires a systems approach taking into account dose, optics and safety relevant to the specific application. Please consult with the factory any questions or concerns.
For any questions about this product, or any UVFocus product, you can email us at uvfocus@lumenfocus.com, or call toll-free at 1-866-UVFOCUS.
Applications: Suitable for most commercial and institutional applications – offices, retail, classrooms, healthcare facilities, labs and clinics
Lumen Output: About 8,800 lm in the 2×4 and 1×4; 6,600 lm in the 2×2
Max Lumens Per Watt: 110
Size Options: 2×2, 2×4, 1×4
Warranty: 5 year limited system warranty
Re-BoardABILITY: Every FFLD is upgradeable. Boards and drivers can easily be swapped out for upgrade in a matter of minutes. Learn more about Re-Boardability here.
Certifications: UL 1598 listed for US and Canada, suitable for damp locations
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components. BAA compliant options are available

Pure, clean illumination

Light emitted from IllumiPure’s LED LEDs shines onto surfaces and penetrates harmful micro-organisms. The light targets naturally occurring molecules that exist inside bacteria, and a reaction occurs inside the cell similar to what occurs when you use bleach. The bacteria is rendered inactive, which prevents it from re-populating on the surface or traveling to further hosts.

The FFRD utilizes high performance disinfecting LEDs from IllumiPure. This retrofit kit can upgrade existing fluorescent troffers quickly and easily – in 3-5 minutes! The LEDs continuously disinfect hard or soft surfaces, killing 99.9 percent of bacteria when the lights are kept on. IllumiPure LEDs are effective against MRSA, C. Difficile, Salmonella and E. Coli. Because IllumiPure LEDs are part of the normal visible LED spectrum (near-UV wavelength), the FFRD is completely harmless to humans and animals. You can remain working while the FFRD cleanses the room! The FFRD utilizes a frosted diffuser that is designed to balance efficiency, aesthetics, and disinfecting performance. A matching luminaire, the FFLD, is also available.The FFRD is part of the UVFocus line of pathogen eradicating luminaires. Every FFRD is made in the USA – in our Henderson, NC facility, utilizing mostly domestic and some foreign components.
Note: These UVFocus products are designed utilizing proven anti-bacterial technology. UVC 405nm near-UV products are shown to substantially reduce bacterial presence. While these products can be considered disinfecting products, they should be used in conjunction with standard, proper disinfecting cleaning procedures to have the greatest impact for maintaining a clean environment. Successful disinfection requires a systems approach taking into account dose, optics and safety relevant to the specific application. Please consult with the factory any questions or concerns.
For any questions about this product, or any UVFocus product, you can email us at uvfocus@lumenfocus.com, or call us toll-free at 1-866-UVFOCUS.

Applications: Suitable for most commercial and institutional applications – offices, retail, classrooms, healthcare facilities, labs and clinics
Lumen Output: About 8,800 lm in the 2×4 and the 1×4; 6,600 lm in the 2×2
Max Lumens Per Watt: 110
Size Options: 2×2, 2×4, 1×4
Warranty: 5 year limited system warranty
Re-BoardABILITY: Every FFRD is upgradeable. Boards and drivers can easily be swapped out for upgrade in a matter of minutes. Learn more about Re-Boardability here.
Certifications: UL 1598 listed for US and Canada, suitable for damp locations
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components. BAA compliant options are available

Pure, clean illumination

Light emitted from IllumiPure’s LEDs shines onto surfaces and penetrates harmful micro-organisms. The light targets naturally occurring molecules that exist inside bacteria, and a reaction occurs inside the cell similar to what occurs when you use bleach. The bacteria is rendered inactive, which prevents it from re-populating on the surface or traveling to further hosts.

The GAC is a revolutionary, state-of-the-art germicidal luminaire – a combination disinfection lay-in and germicidal air chamber. This unit utilizes anti-viral and anti-bacterial lighting technology. The anti-bacterial down light in the GAC continuously disinfects any hard or soft surfaces, simply by keeping the lights on. These high performance LEDs from IllumiPure are near-UV, and part of the normal visible LED spectrum, making them completely harmless to humans and animals. You can keep working while the down light cleanses the room! Fans circulate air into a chamber in the back of the luminaire.
Inside the chamber, 260-265nm UVC LEDs cleanse the air of all airborne pathogens (viruses, including SARS-CoV-2, bacteria and spores) with a 99-plus percent inactivation rate. Clean air is then circulated back into the room. There are two fan options – normal and high volume for greater airflow. The housing is constructed of aluminum, and the frosted lens is proprietary polycarbonate. A similar product, minus the down light component, is available in the GAB germicidal air chamber. The GAC is part of the UVFocus line of pathogen eradicating luminaires.
Note: Successful UV disinfection requires a systems approach taking into account dose, optics and safety relevant to the specific application. Please consult with the factory any questions or concerns. For any inquiries about this product, email us at uvfocus@lumenfocus.com. You can also call toll-free at 1-866-UVFOCUS.
Applications: Suitable for most commercial and institutional applications – office, retail, classrooms, healthcare facilities. May be placed in room, plenum or return duct.
Lumen Output: About 6,900 in the 2×2, 8,970 in the 2×4
Max Lumens Per Watt: 115
Size Options: 2×2, 2×4
Warranty: 4 years for downlight LED boards; 30,000 hours for LED boards in back chamber; 3 years for fans; balance of fixture: 10 years
Certifications: CE and UL pending; patent pending
Made in the USA utilizing mostly domestic and some foreign components
Light emitted from IllumiPure’s LEDs in the GAC down light shines onto surfaces and penetrates harmful micro-organisms. The light targets naturally occurring molecules that exist inside bacteria, and a reaction occurs inside the cell similar to what occurs when you use bleach. The bacteria is rendered inactive, which prevents it from re-populating on the surface or traveling to further hosts.
In the disinfection chamber, LEDs emitting UVC wavelengths cleanse the air that is circulating inside and inactivate airborne pathogens.

The GAB sits in recessed grid ceilings and provides germicidal cleansing in rooms. It is a white, aesthetically pleasing aluminum frame with a center fan (or two fans, in the case of the 2×4). The fans circulate air into the chamber in the back of the fixture, where state-of-the-art IllumiPure LEDs utilize 260-265nm UVC to cleanse the air of all airborne pathogens (viruses, including SARS-CoV-2, bacteria and spores). These pathogens are inactivated at a rate of more than 99 percent. Since the chamber is mounted in the back of the fixture, individuals in the room are shielded from exposure. So it is safe to remain in the room while the GAB is hard at work cleaning the air. There are two fan options – normal and higher volume for greater airflow. A similar fixture with a down light component is available in the GAC.The GAB is part of the UVFocus line of pathogen eradicating luminaires.
Note: Successful UV disinfection requires a systems approach taking into account dose, optics and safety relevant to the specific application. Please consult with the factory any questions or concerns. For any inquiries about this product, email us at uvfocus@lumenfocus.com. You can also call us toll-free at 1-866-UVFOCUS.
Applications: Suitable for most commercial and institutional applications – office, retail, classrooms, healthcare facilities. May be placed in room, plenum or return duct.
Size Options: 2×2, 2×4
Warranty: 30,000 hours for LED boards in back chamber; 3 years for fans; balance of fixture: 10 years
Certifications: CE and UL pending; patent pending
Made in the USA utilizing mostly domestic and some foreign components
Pure, clean illumination
Inside the rear disinfection chamber of the GAB, IllumiPure LEDs emitting UVC wavelengths cleanse the air that is circulating inside and inactivate airborne pathogens. The air is then re-circulated into the room.

The FPB Select is an adjustable LED flat panel, with three wattage outputs and three color temperature options that are field selectable. Wattage and CCT are easily adjusted via switches on the back. The FPB Select features state-of-the-art backlit LED technology. Illumination is uniform, with minimal glare and no visible LED pixelation. PMMA lensing over the LEDs will not discolor over time. The FPB Select\’s frame is aluminum, with a white finish. The rigid back enclosure is die-formed steel, which prevents warping. The FPB Select can be recessed into grid ceilings. Surface mount and suspension cable mount kits are available.

Applications: Suitable for most commercial, industrial and institutional applications – office, retail, classrooms, healthcare facilities
Lumen Output: 2,500 to 5,625 lm
Max Lumens Per Watt: 127.5
Predicted L70 Lifetime: >60,000 hours (reported)
Warranty: 5 year limited system warranty
Certifications: UL listed for US and Canada, suited for damp locations. IC-rated for insulated ceilings, RoHS, FCC

Mounting options

There are three mounting kit options that can be ordered separately. From left: the Surface Mount Kit (for 2×2 and 2×4 sizes), the 2-Cable Kit for suspension mounting, and the 4-Cable Kit for suspension mounting.

The FPB features state-of-the-art backlit LED technology. Illumination is uniform, with minimal glare and no visible LED pixelation. PMMA lensing over the LEDs will not discolor over time. The FPB’s frame is aluminum, with a white finish. The rigid back enclosure is die-formed steel, which prevents warping. The FPB can be recessed into grid ceilings. Surface mount and suspension cable mount kits are available.

Applications: Suitable for most commercial, industrial and institutional applications – office, retail, classrooms, healthcare facilities
Lumen Output: 3,750 to 6,375 lm
Max Lumens Per Watt: 127.5
Predicted L70 Lifetime: >60,000 hours (reported)
Warranty: 5 year limited system warranty
Certifications: UL listed for US and Canada, suited for damp locations. IC-rated for insulated ceilings, RoHS, FCC

Mounting options

There are three mounting kit options that can be ordered separately. From left: the Surface Mount Kit (for 2×2 and 2×4 sizes), the 2-Cable Kit for suspension mounting, and the 4-Cable Kit for suspension mounting.

The DLS LED down light features field selectable color temperature and output. Three color temperatures can be selected: 3000K, 4000K and 5000K, at 90 CRI. There are two size options – the DLS 6, which fits 6″ to 7.4″ diameter openings, and the DLS 8, which fits 7.6″ to 9.4″ diameter openings. The DLS 6 has three selectable output levels: 10W, 15W and 22W. The DLS 8 can be set to 12W, 20W or 30W. The DLS works for retrofit and new construction applications, and is compatible with insulated and non-insulated ceilings. It features 0-10V dimming down to 10 percent.
Applications: Suitable for most commercial, industrial and institutional retrofit and new construction applications
Lumen Output: 850-1,950 lm in the DLS 6; 1,000-2,500 in the DLS 8
Max Lumens Per Watt: 90
Predicted L70 Lifetime: 50,000 hours
Warranty: 5 year limited system warranty
Certifications: ETL listed for wet locations, IP43, RoHS compliant
Durable construction

The DLS features durable thermoplastic and aluminum construction. It ships with 19 inches of 3/8″ flex cable for easy install into junction boxes.

The GUA P is a pendant-mounted luminaire designed for upper air germicidal irradiation. These fixtures utilize low-wattage, ozone-free GUVT8 lamps that reduce airborne pathogens using 254nm UVC. When mounted at the specified height, the UVC light will cleanse the upper air in the room and will not come into contact with humans or animals. The electronic ballast is specifically matched to the lamps for optimal performance and lifetime. A wall sconce version is also available – the GUA S. The GUA P is part of the UVFocus product line of pathogen eradicating luminaires.
Note: UVFocus products are designed utilizing proven germicidal and antibacterial technology. UVC 254nm products work to deactivate most common viruses (as well as bacteria, molds and yeasts), and 405nm near-UV products are shown to substantially reduce bacterial presence. While these products can be considered disinfecting products, they should be used in conjunction with standard, proper disinfecting cleaning procedures to have the greatest impact for maintaining a clean environment. Successful UV disinfection requires a systems approach taking into account dose, optics and safety relevant to the specific application. Please consult with factory any questions or concerns. Please visit our UVFocus Safety page (link below) to learn more information.
For any inquiries about this product, email us at uvfocus@lumenfocus.com, or use the inquiry form at the bottom of this page. You can also call toll-free at 1-866-UVFOCUS.

Applications: Suitable for most commercial and institutional applications: lobbies, hallways, offices, bathrooms, conference rooms, hotels, retail
Lamp Useful Life: 18,000 hours
Size Options: 4 foot
Finish Options: Silver (standard), white, black, stainless steel
Warranty: 3 year limited system warranty (excludes lamps). Lamps covered under manufacturer warranty
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components
Caution: Do not ascend into the path of irradiation emitted from this product. Make sure unit is powered off before climbing ladders, stairs, etc., or in any other situation where you are above the mounting height of the unit. At 254nm, direct UVC irradiation is not safe for humans. Avoid looking directly at the light and take necessary precautions during installation and maintenance of this product. Lamps used in this product contain mercury. Each product ships with warning labels on the fixture and safety handling guides in the cartons. Please read and heed all safety instructions before using this product.

Engineered for pathogen irradiation

The GUA P is constructed of durable cold rolled steel with a silver (standard), white or black powder coat finish. A stainless steel housing is optional. The polished aluminum reflector is engineered for optimal dispersion of UVC wavelength for irradiation of pathogens.

The GUA S is a wall-mounted sconce designed for upper air germicidal irradiation. These fixtures utilize low-wattage, ozone-free GUVT8 lamps that reduce airborne pathogens using 254nm UVC. When mounted at the specified height, the UVC light will cleanse the upper air in the room and will not come into contact with humans or animals. The electronic ballast is specifically matched to the lamps for optimal performance and lifetime. The GUA S is constructed of durable cold rolled steel with a silver (standard), white or black powder coat finish. A stainless steel housing is optional. The polished aluminum reflector is engineered for optimal dispersion of UVC wavelength for irradiation of pathogens. A pendant mount version is also available – the GUA P. The GUA S is part of the UVFocus product line of pathogen eradicating luminaires.
Note: UVFocus products are designed utilizing proven germicidal and antibacterial technology. UVC 254nm products work to deactivate most common viruses (as well as bacteria, molds and yeasts), and 405nm near-UV products are shown to substantially reduce bacterial presence. While these products can be considered disinfecting products, they should be used in conjunction with standard, proper disinfecting cleaning procedures to have the greatest impact for maintaining a clean environment. Successful UV disinfection requires a systems approach taking into account dose, optics and safety relevant to the specific application. Please consult with factory any questions or concerns. Please visit our UVFocus Safety page (link below) to learn more information.
For any inquiries about this product, email us at uvfocus@lumenfocus.com, or use the inquiry form at the bottom of this page. You can also call us toll-free at 1-866-UVFOCUS.

Applications: Suitable for most commercial and institutional wall mount applications: lobbies, hallways, offices, bathrooms, conference rooms, hotels, retail
Size Options: 2 foot (15W) and 4 foot (36W)
Lamp Useful Life: 18,000 hours
Finish Options: Silver (standard), white, black, stainless steel
Warranty: 3 year limited system warranty (excludes lamps). Lamps covered under manufacturer warranty
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components
Caution: Do not ascend into the path of irradiation emitted from this product. Make sure unit is powered off before climbing ladders, stairs, etc., or in any other situation where you are above the mounting height of the unit. At 254nm, direct UVC irradiation is not safe for humans. Avoid looking directly at the light and take necessary precautions during installation and maintenance of this product. Lamps used in this product contain mercury. Each product ships with warning labels on the fixture and safety handling guides in the cartons. Please read and heed all safety instructions before using this product.

AirFocus

The AirFocus (\\”AF\\”) option provides added fans to help maximize air flow, and allow a greater percentage of air and pathogens to traverse the eradication zone.

The GCD provides germicidal luminaire provides pathogen eradication in unoccupied rooms. The GCD hangs in the corner where the wall meets the ceiling. It utilizes low-wattage, ozone-free GUVT8 lamps to provide 254nm UVC illumination to reduce airborne pathogens. UVC at 254nm is capable of inactivating 99-plus percent of all bacteria and viruses (including SARS-CoV-2). Eradication time for specific pathogens varies depending on time and dose. A reverse occupancy sensor powers off the unit when a person is detected in the occupancy zone. The unit powers back on once the area is unoccupied again for a period of time. Wireguards come standard. . The electronic ballast on the GCD is specifically matched to the lamps for optimal performance and lifetime. The GCD is part of the UVFocus product line of pathogen eradicating luminaires.
Note: UVFocus products are designed utilizing proven germicidal and antibacterial technology. UVC 254nm products work to deactivate most common viruses (as well as bacteria, molds and yeasts), and 405nm near-UV products are shown to substantially reduce bacterial presence. While these products can be considered disinfecting products, they should be used in conjunction with standard, proper disinfecting cleaning procedures to have the greatest impact for maintaining a clean environment. Successful UV disinfection requires a systems approach taking into account dose, optics and safety relevant to the specific application. Please consult with factory any questions or concerns. Please visit our UVFocus Safety page (link below) to learn more information.
For any inquiries about this product, email us at uvfocus@lumenfocus.com, or use the inquiry form at the bottom of this page. You can also call us toll free at 1-866-UVFOCUS.
Applications: Suitable for most commercial and institutional applications: lobbies, hallways, offices, bathrooms, conference rooms, hotels, retail
UVC Out of Fixture: 11,757 mW
Input Watts: 42W
Lamp Useful Life: 18,000 hours
Size Options: 4 foot
Finish Options: Silver (standard), white, black, stainless steel
Warranty: 3 year limited system warranty (excludes lamps). Lamps covered under manufacturer warranty
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components
Caution: This product is intended for use in unoccupied rooms only. At 254nm, direct UVC irradiation is not safe for humans. Avoid looking directly at the light and take necessary precautions during installation and maintenance of this product. Lamps used in this product contain mercury. Each product ships with warning labels on the fixture and safety handling guides in the cartons. Please read and heed all safety instructions before using this product.

Durable design, high performance

The GCD housing is constructed of durable cold rolled steel, with a silver (standard), white or black powder coat finish. A stainless steel option is available. The aluminum reflector is optimized for dispersion of UVC wavelength for the irradiation of pathogens.

The GLS provides germicidal luminaire provides pathogen eradication in unoccupied rooms. The GLS can be installed in recessed grid ceiling or surface-mounted. It utilizes low-wattage, ozone-free GUVT8 lamps to provide 254nm UVC illumination to reduce airborne pathogens. UVC at 254nm is capable of inactivating 99-plus percent of all bacteria and viruses (including SARS-CoV-2). Eradication time varies depending on time and dose. A reverse occupancy sensor powers off the unit when a person is detected in the occupancy zone. The unit powers back on once the area is unoccupied again for a period of time. Wireguards come standard. The electronic ballast on the GLS is specifically matched to the lamps for optimal performance and lifetime. The GLS is part of the UVFocus product line of pathogen eradicating luminaires.
Note: UVFocus products are designed utilizing proven germicidal and antibacterial technology. UVC 254nm products work to deactivate most common viruses (as well as bacteria, molds and yeasts), and 405nm near-UV products are shown to substantially reduce bacterial presence. While these products can be considered disinfecting products, they should be used in conjunction with standard, proper disinfecting cleaning procedures to have the greatest impact for maintaining a clean environment. Successful UV disinfection requires a systems approach taking into account dose, optics and safety relevant to the specific application. Please consult with factory any questions or concerns. Please visit our UVFocus Safety page (link below) to learn more information.
For any inquiries about this product, email us at uvfocus@lumenfocus.com, or use the inquiry form at the bottom of this page. You can also call us toll free at 1-866-UVFOCUS.
Applications: Suitable for most commercial and institutional applications: lobbies, hallways, offices, bathrooms, conference rooms, hotels, retail
UVC Out of Fixture: 11,757 mW
Input Watts: 42W
Lamp Useful Life: 18,000 hours
Size Options: 1×4
Finish Options: Silver (standard), white, black, stainless steel
Warranty: 3 year limited system warranty (excludes lamps). Lamps covered under manufacturer warranty
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components
Caution: This product is intended for use in unoccupied rooms only. At 254nm, direct UVC irradiation is not safe for humans. Avoid looking directly at the light and take necessary precautions during installation and maintenance of this product. Lamps used in this product contain mercury. Each product ships with warning labels on the fixture and safety handling guides in the cartons. Please read and heed all safety instructions before using this product.

The PIC provides bipolar particle ionization from a small, lightweight wall-mounted unit. The internal ionization system eradicates pathogens – bacteria, mold and viruses – and neutralizes odors. It provides particle reduction and smoke control. A side-mounted fan pulls in air, which flows across the bipolar ionization unit inside. Ions are then broadcast a significant distance into the room through vents on the opposite side to assist with rapid pathogen eradication. The PIC is safe for humans, so you can remain in the room while it operates. The internal ionization unit features all-composite and carbon fiber construction that can stand up to corrosive environments. If features a programmable auto-cleaning cycle. The PIC is part of the UVFocus product line of pathogen eradicating luminaires.
For any inquiries about this product, email us at uvfocus@lumenfocus.com, or call toll-free at 1-866-UVFOCUS.
Applications: Suitable for most commercial and institutional applications: hospitality, offices, manufacturing, healthcare/senior care, animal care, food service, schools/classrooms
Finish Options: White (standard), Matte Black, Metallic Silver
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components
Durable, lightweight design

The PIC is incredibly lightweight and easy to install. It is constructed of highly durable aluminum with an aesthetically pleasing white finish. Finish options also include Matte Black and Metallic Silver.

The EWLN is an LED wrap suitable for many applications. It can be surface, stem or cable mounted individually or in continuous rows. The EWLN features highly efficient LED boards and drivers, and is available in multiple lumen output packages to help you get the exact light level you need. There are multiple controls options available, including programmable photo/motion sensors, occupancy sensors, microwave sensors and photocells (see spec sheet for more info). The EWLN is available in 2-foot, 4-foot and 8-foot lengths. Every EWLN is made in the USA – in our Henderson, NC facility, using mostly domestic and some foreign components.
Applications: Suitable for industrial, retail and institutional applications: warehouses, manufacturing facilities, stock rooms, classrooms
Lumen Output: About 1,400 lumens in the 2-foot version up to 17,000 in the 8-foot version
Max Lumens Per Watt: 143.1
Size Options: 2-foot, 4-foot, 8-foot
Predicted L70 Lifetime: Up to 189,000 hours (calculated)
Warranty: 5 year limited system warranty. 10-year extended warranty available on specific models
Re-BoardABILITY: Every EWLN is upgradeable. Boards and drivers can easily be swapped out for upgrade in a matter of minutes. Learn more about Re-Boardability here.
Certifications: UL 1598 listed for US and Canada, suitable for damp locations. DesignLights Consortium qualified on specific configurations.
Made in the USA, in our Henderson, NC facility, utilizing mostly domestic and some foreign components. BAA compliant options are available

Durable construction

The EWLN is constructed of die-formed, heavy-guage cold rolled steel. It is pre-painted with a highly durable and highly reflective white finish. The lens is clear prismatic acrylic.

The WPA is a high performance LED wall pack with attractive architectural styling. It features an integral photocell and 0-10V dimming drivers standard. It has a 120 degree adjustable head, with full cut-off at the 0 degree head adjustment. The specular reflector provides a forward distribution.
Applications: Suitable for exterior wall mount applications
Lumen Output: 6,953 lumens in the MD version; 10,538 in the HI
Max Lumens Per Watt: 128.7
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated
Durable construction

The WPA features a precision die cast aluminum housing and stainless steel hardware. The finish is a chip and fade resistant powder coat in bronze. The lens is tempered glass. An ingress resistant gasket is included.

The EPN v2 is a high performance LED wall pack that features uniform illumination with no visible LED pixilation. The housing is die cast aluminum with a dark bronze powder coat finish. The tempered borosilicate glass lens is sealed with a seamless silicone gasket to prevent leaks. The EPN v2 has three half-inch NPT threaded openings for rigid electrical conduit, or for button photocells.

Applications: Suitable for most exterior wall mount applications – industrial, retail, commercial
Lumen Output: From about 6,400 lm to over 15,700 lm
Max Lumens Per Watt: 151
Predicted L70 Lifetime: Greater than or equal to 158,000 hrs (calculated)
Predicted L90 Lifetime: Greater than or equal to 49,000 hrs (calculated)
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP65 rated. FCC Par 15, Class A compliant. IEEE C.62.41-2002, 2kV Surge Protection compliant. RoHS compliant

Multiple output options

The EPN v2 is available in five different outputs, in both 4000K and 5000K. The VL (\\”Very Low\\”) output option produces 6400+ lumens at 42 watts. On the high end, the VH (\\”Very High\\”) output option produces 15,500+ lumens at 111 watts.

The EMEF provides energy efficient, long life red or green LED exit sign illumination. This unit has many certifications – including NSF, IP66, and UL certified for use in food service operations. The EMEF features fully adjustable, ultra-bright 3.3W MR-16 base white LED lamp heads for optimized center-to-center spacing. The 12W and 15W models feature 6V/12V long life, maintenance-free rechargeable NiCd batteries, while the 28W option features a 6V/12V rechargeable lead acid battery. The EMEF offers 4.8W, 7.8W and 20.8W of remote capacity standard on the 12W, 15W and 28W models. A fully automated solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
Applications: Suitable for indoor or outdoor use where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics. NiCd battery prorated for 5 years. Lead acid battery prorated for 2 years.
Certifications: UL listed for wet locations, UL certified for use in food service operations. Other certifications – NEMA 4X-rated, IP66, UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes

Installation and construction

The housing on the EMEF is constructed of reinforced polycarbonate in white, gray or black. The corrosion-resistant enclosure features a one-piece, high-impact resistant, UV-stabilized polycarbonate lens and molded gasket with stainless steel screws. A polycarbonate mounting canopy is included for top or end mount. A universal knockout pattern on the back, for back mounting, is gasketed for a watertight seal.

The MREM utilizes 3.3W high performance and high output MR-16 base LED lamps. These LED lamp heads feature ultra-bright, long life illumination. The lamp heads are adjustable to allow for optimal center to center spacing. The 6V sealed lead acid battery is maintenance-free and rechargeable. An internal solid-state transfer switch automatically connects the internal battery to LED board and LED lamp heads for a minimum of 90 minutes of emergency illumination. A fully automated solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours. The MREM offers 13W of remote capacity (6V DC output) when using standard 3.3W lamps, and 10W of remote capacity (6V DC output) when using optional 5.0W lamps.
Applications: Suitable for wall mount in dry or damp locations where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics. Battery prorated for 5 years
Certifications: UL listed for damp locations. UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes
Installation and construction

The MREM is available in white or black finish. The housing is injection-molded, engineering grade, 5VA flame retardant, high-impact resistant thermoplastic. A universal knockout pattern on the back plate is used for wall mounting. For easy installation, the unit snaps into place making internal electrical connections.

The MREHF features ultra-bright, long life white LED lamp heads. These remote emergency luminaires can be wall or ceiling mounted. The adjustable lamp heads allow for optimal center to center spacing. Power comes from a low voltage 6V/12V DC power source, with low voltage wiring (not provided). The MREHF is compatible with LumenFocus’ EMEF, MREM and EMEW exit/emergency units with RC option. It is available in white, gray or black finish.
Applications: Suitable for most indoor wall or ceiling mount applications where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics
Certifications: UL listed for wet locations, UL certified for use in food service operations. Other certifications – NEMA 4X-rated, IP66, UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes
Installation and construction

The MREHF housing is reinforced polycarbonate. The corrosion-resistant enclosure features a one-piece, high-impact resistant, UV-stabilized polycarbonate lens and molded gasket with stainless steel screws. A universal knockout pattern on the back is provided for back mounting, with a gasket for watertight seal. There is a one-lamp head option and a two-lamp head option.

The MREH utilizes ultra-bright, long life white LED lamp heads for emergency illumination. These MR-16 base LED lamps are high output and high performance, at 3.3W. Optional 5.0W high-lumen heads are available for increased center-to-center spacing. It comes in white or black finish. It is suitable for wall or ceiling mount. The MREH is powered from a low voltage power source with low voltage wiring (not provided). It is compatible with the LumenFocus EMEF, MREM and EMEW exit/emergency products with RC option.
Applications: Suitable for most indoor wall or ceiling mount applications where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics
Certifications: UL listed with approved LumenFocus products. Other certifcations: UL924, NFPA 101 Life Safety Code, NEC, OSHA
Installation and construction

The MREH is constructed of injection-molded, engineering grade, 5VA flame retardant, high-impact resistant thermoplastic. The universal mounting base mounts to a single-gang switch box.

The GLL LED grow light features a full spectrum distribution of PAR (photosynthetically active radiation) for full cycle cultivation. Each luminaire delivers from 368 to 873 micromols of PPF to accommodate a variety of growing areas. The GLL delivers photosynthetic photon efficacy (PPE) of 2.1. One set of V-hooks with hanging chains, and one set of ratcheting rope hangers come standard. Cable mounting kits are optional, as are wire guards for added durability. Clear and diffuse lenses are optional.
Applications: Suitable for most agricultural applications
Predicted Lifetime: Long life LEDs provide 38,000 hours of operation with at least 90 percent of initial PPF
Warranty: 5 year limited system warranty
Certifications: UL listed for damp location; complies with RoHS (Restriction on Hazardous Substances) requirements; complies with FCC Part 15, Class A; complies with IEEE C.62.41 1991, input transient protection (2.5kV)
Rugged construction

The GLL features a rugged, painted steel housing that can withstand demanding horticultural environments. There are three sizes/output options: the GLL 2 LW (2\\\\’ x 1\\\\’, 10 lbs.), the GLL 4 MD (4\\\\’ x 1\\\\’, 14 lbs.), and the GLL 4W HI (4\\\\’ x 1.5\\\\’, 23 lbs.).